When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Category: Wheels & Tires Price: $1800 Private or Vendor Listing: Private Listing Part fits (you may select multiples): R50, R52, R53 Location (Region): SouthEast Item Condition: Used
Selling my SSR Type Cs fitted with Yokohama A048’s 225-45-16
These are Semi Solid Forged making them lightweight yet very strong
Wheels weigh 11.5lbs each
16x7.5 et42
No dings. No Curb rash. Some minor blemishes and superficial scratches on the clear coat.
Wheels are in great shape. Tires are at 50%
These are super rare, hard to find.
Buyer pays actual shipping plus PayPal fees. I am willing to meet halfway within reason.
Beauties. I have these wheels but they're 16x6.5. Super, super light.
As a note of caution for folks running 14mm wheel bolts of studs: my SSR wheels will only take 12mm. The 14mm don't fit. Not sure about the ones the seller is offering. Just keep that possibility in mind.
Love those wheels. I have a set of 16x7 type C as well and the only bad thing i have to say about them is you'll need spacers to clear a BBK. Good luck with the sale.
Beauties. I have these wheels but they're 16x6.5. Super, super light.
As a note of caution for folks running 14mm wheel bolts of studs: my SSR wheels will only take 12mm. The 14mm don't fit. Not sure about the ones the seller is offering. Just keep that possibility in mind.
Good luck with the sale.
I installed M14 to M12 studs on my August 2006 R53. I believe that pre July 2006 models came with 12mm wheel bolts (I cannot remember the exact change over date)
If you have one of the last R53’s produced in the latter half of 2006, you will need a stud conversion kit. Before that you will be OK.
Love those wheels. I have a set of 16x7 type C as well and the only bad thing i have to say about them is you'll need spacers to clear a BBK. Good luck with the sale.
I believe that these will clear any BBK designed for 15” wheels. They clear my TSW BDM 11.75x1.25 BBK without any spacers. Detroit Tuned build a similar BBK with 1.2” wide rotor and TCE has a 15” Wilwood BBK that will clear.
I do do not know about some of the other larger BBK kits out there.
I installed M14 to M12 studs on my August 2006 R53. I believe that pre July 2006 models came with 12mm wheel bolts (I cannot remember the exact change over date)
If you have one of the last R53’s produced in the latter half of 2006, you will need a stud conversion kit. Before that you will be OK.
That's exactly what I did. My R53 is a July 2006 build.
