Anyone using ramps.
While being 1" lowered
With a splitter!!!


And what's with the 3 different brands I see using the name Rhino Ramps??

 

I have Rhino ramps 11909. My F56 is lowered probably over 1cm by now. The factory front splitter does make contact with the ramp, I built an extension with some wood and run a lag bolt thru to fasten them together.
See my old post
https://www.northamericanmotoring.co...2339046-a.html

 

Mine is lowered 1 inch (2.5 cm) with a Schnitzer splitter.

I just ordered a set of 11909 from Amazon, can always return them!

 

I’ve used ramps before, and if you’re lowered by 1 inch with a splitter, you want to pick something that’ll give you enough clearance without scraping. I’ve found that some ramps can be a bit too steep, especially with a splitter, so I’d suggest looking for a set with a more gradual incline. As for the whole "Rhino Ramps" thing, it’s a bit strange. A few different brands are using that name, but they all seem to do the job well enough. If you’re in New Zealand, you might want to check out car ramps nz for a solid range that could work for your setup.

 

I got a 3" drop & I'm still lookin' if I wanna even bother. Just go to Mini not too often , I gotta have a reason to get under there. Ima old man
.

 

race ramps has options, I use them and they work on both the lowered Mini and the lowed Mustang