Hi I managed to change all interior lights with led ones.
Firstly I don't want any error code.

Fog light is H8 I think,
Is this suitable for fogs?
http://www.ebay.com/itm/GP-Thunder-5...3e6608&vxp=mtr

Park lights are T10.
Is it 5w?
I'm going to buy old lambs not leds, for errors
like this one
http://urun.gittigidiyor.com/garaj/m...-urun-63486977

In the picture I signed two bulb.
What model are they?
I want to buy osram diadem for number 2. Is it suitable?



Uploaded with ImageShack.us

 

There are led bulbs threads that cover this. Just search the electrical threads. Check out the led switchback bulbs"do not use" thread. Very informative

 

How can I change licence plate lamps?
I couldn't rip off them...

 

little slit on the outside of the little black housings...put a flat head in the slit and pop it out, not hard to do just clips in there

 

slide to right or left?

 

The bulb #2 turn signal is a #7507 - just installed a couple of the chrome stealth bulbs from Amazon.com $9.00 for the pair + shipping. (Car came w/clear lense but had amber bulbs from factory)

 

#1 is 194

 

I strongly suggest using a flat/narrow plastic pry tool. Insert it in the right side. Your pry tool should just catch a copper retaining strip hidden on the right side of the housing. Now, push left while you very gently pry the housing out of the cut-out, right side first.

HTH,

 

A.K.A. an 1157 bulb.

 

It's NOT an 1157 - the 7507 is single filament and the pins are offset.

1157 is dual filament

 

Oops! 1156?

 

this site has diagrams of the various bases of bulbs

http://www.autolumination.com/

1157


1156 aka P21Y


7507 aka PY21W




scott

 

#2 bulbs are 2357 A.K.A. 1157