Hi,

I'm from Brazil and all the CMs here are 5 seated without flat load floor.

I'm looking for a place to buy the flat load floor from Internet, because I can't find it in any dealer in Brazir, or when I find it they want to charge me usd 2000,00

Thanks

 

The price you have been quoted isn't much more than what I have been quoted in Norway to convert my non flat load floor to a flat load floor, to make the conversion the dealer has to install a completely new boot liner, it's not just a case of buying the floor and putting it in.

 

All indications are that trying to add it on is a total dor na bunda. Lots of parts and brackets that need to be installed and alterations to the liner. Some people have had success with do-it-yourself projects. Check the many, many posts for suggestions.

Good luck!

 

In the US we have a lip so to get something to cover the boot well when the divider is up I cut a piece of 3/8" plywood and glued an old fleece blanket to both sides.

Works great.

If I did not have the lip I would measure and cut a piece of plywood and attach legs where best to sit on the well bottom. For access just list and plop with a dowell.

Bill

 

Try Prestige MINI in Mahwah/Ramsey NJ. Angelo is the internet salesman and I believe they have an eBay store.

 

Thank you for the idea. I'll try it.

 

Great!

 

Thank you all!

I'll try first the DIY approach. If it didn't work, I'll go to eBay.