Service Recs in Lansing/East Lansing - or within 150mi
Thread Starter
|
2nd Gear
Joined: Apr 2006
Posts: 86
Likes: 0
From: East Lansing, MI by way of Cincinnati, OH
Service Recs in Lansing/East Lansing - or within 150mi
Hey fellow Michigan NAM'rs - I've got a problem and hope someone can help me out.
Are there any reputable service locations around here? I'm looking for a place to handle the usual (oil change, filters, tune up, etc.) and maybe a few light mods (brakes, bushings, sway bars, etc) and have had NO luck over the past 7mos. I'd like to find that place that isn't opposed to me bringing in my own parts from Moss, ALTA, MINIcarparts.net, etc.
I like to hear your experiences, what you had done, cost factor, parts issues, etc. If a shop is highly recommended, I don't mind making the trek.
So if you've got ANY suggestions, please feel free to leave 'em.
As always, Thanks!!!
Are there any reputable service locations around here? I'm looking for a place to handle the usual (oil change, filters, tune up, etc.) and maybe a few light mods (brakes, bushings, sway bars, etc) and have had NO luck over the past 7mos. I'd like to find that place that isn't opposed to me bringing in my own parts from Moss, ALTA, MINIcarparts.net, etc.
I like to hear your experiences, what you had done, cost factor, parts issues, etc. If a shop is highly recommended, I don't mind making the trek.
So if you've got ANY suggestions, please feel free to leave 'em.
As always, Thanks!!!
Banned
iTrader: (2)
Joined: Oct 2005
Posts: 3,499
Likes: 0
From: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
Check with http://www.detroittuned.com/shop/ Chad and Team are some of the Best MINI Techs in the World.
Check with http://www.detroittuned.com/shop/ Chad and Team are some of the Best MINI Techs in the World.
I'm actually heading over to DT in about an hour for a sway bar install.
Banned
iTrader: (2)
Joined: Oct 2005
Posts: 3,499
Likes: 0
From: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
If it's a MINI Issue I bet they can deal with it.
Thread Starter
|
2nd Gear
Joined: Apr 2006
Posts: 86
Likes: 0
From: East Lansing, MI by way of Cincinnati, OH
I goggled/google mapped them, just over an hour away -- freakin' sweet. I'll have to take a trip down that way and see what they recommend for my R50. This is about to get good......!!!
Banned
iTrader: (2)
Joined: Oct 2005
Posts: 3,499
Likes: 0
From: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
I also have an R50 and encourage you to ask Chad for the following setup to get what power you do have to the ground better
DDM CAI
Megan Catback
TSW Damper or IE Motor mounts
BRISK Plugs or sim
Then work on the suspension to get that R50 around the corner faster then ever.
I lived in Lansing for a year a few years ago I bet with the avg Freeway speed out there you can get to DT in less then an hour,
Have fun with DT and your new MINI.
DDM CAI
Megan Catback
TSW Damper or IE Motor mounts
BRISK Plugs or sim
Then work on the suspension to get that R50 around the corner faster then ever.
I lived in Lansing for a year a few years ago I bet with the avg Freeway speed out there you can get to DT in less then an hour,
Have fun with DT and your new MINI.
Trending Topics
Absolutely! In fact, I just got back from there and my old MCS swaybar is there waiting for you to add it to your Cooper to improve cornering.
In fact, I just got back from there and my old MCS swaybar is there waiting for you to add it to your Cooper to improve cornering.
Thread Starter
|
2nd Gear
Joined: Apr 2006
Posts: 86
Likes: 0
From: East Lansing, MI by way of Cincinnati, OH
I also have an R50 and encourage you to ask Chad for the following setup to get what power you do have to the ground better
DDM CAI
Megan Catback
TSW Damper or IE Motor mounts
BRISK Plugs or sim
Then work on the suspension to get that R50 around the corner faster then ever.
I lived in Lansing for a year a few years ago I bet with the avg Freeway speed out there you can get to DT in less then an hour,
Have fun with DT and your new MINI.
DDM CAI
Megan Catback
TSW Damper or IE Motor mounts
BRISK Plugs or sim
Then work on the suspension to get that R50 around the corner faster then ever.
I lived in Lansing for a year a few years ago I bet with the avg Freeway speed out there you can get to DT in less then an hour,
Have fun with DT and your new MINI.
Oh, my Hotwheels aren't new - he's been around for a while. Though I am debating moving up to a black Clubman S, now that you can have the rear trim in black as well -- a nice addition to my current Cooper.
Thread Starter
|
2nd Gear
Joined: Apr 2006
Posts: 86
Likes: 0
From: East Lansing, MI by way of Cincinnati, OH
Gracias.
Thread Starter
|
2nd Gear
Joined: Apr 2006
Posts: 86
Likes: 0
From: East Lansing, MI by way of Cincinnati, OH
Front blades are a breeze - picked up replacements @ Target. The rear insert, I'm not so sure. I usually have that one swapped out @ the dealer when I'm back in Cincinnati. I would imagine Napa or another auto parts store would have the insert. I did, a while back, order a replacement rear blade thru Moss Mini [www.mossmini.com] - item # 103-926.
Last edited by corohio1977; Jun 23, 2010 at 01:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post