Michigan MINI Motor Club The Michigan MINI Motor Club forum. Visit our club site at www.michiganmini.org

Service Recs in Lansing/East Lansing - or within 150mi

Thread Tools
 
Search this Thread
 
  #1  
Old 02-21-2009, 08:20 AM
corohio1977's Avatar
corohio1977
corohio1977 is offline
2nd Gear
Thread Starter
Join Date: Apr 2006
Location: East Lansing, MI by way of Cincinnati, OH
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Service Recs in Lansing/East Lansing - or within 150mi

Hey fellow Michigan NAM'rs - I've got a problem and hope someone can help me out.

Are there any reputable service locations around here? I'm looking for a place to handle the usual (oil change, filters, tune up, etc.) and maybe a few light mods (brakes, bushings, sway bars, etc) and have had NO luck over the past 7mos. I'd like to find that place that isn't opposed to me bringing in my own parts from Moss, ALTA, MINIcarparts.net, etc.

I like to hear your experiences, what you had done, cost factor, parts issues, etc. If a shop is highly recommended, I don't mind making the trek.

So if you've got ANY suggestions, please feel free to leave 'em.

As always, Thanks!!!
 
  #2  
Old 02-21-2009, 08:38 AM
AutoXCooper.com's Avatar
AutoXCooper.com
AutoXCooper.com is offline
Banned
iTrader: (2)
Join Date: Oct 2005
Location: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
Posts: 3,499
Likes: 0
Received 0 Likes on 0 Posts
Check with http://www.detroittuned.com/shop/ Chad and Team are some of the Best MINI Techs in the World.
 
  #3  
Old 02-21-2009, 08:50 AM
Big Daddy's Avatar
Big Daddy
Big Daddy is offline
5th Gear
iTrader: (1)
Join Date: Feb 2005
Location: Windsor, ON Canada
Posts: 830
Likes: 0
Received 1 Like on 1 Post
Originally Posted by AutoXCooper.com
Check with http://www.detroittuned.com/shop/ Chad and Team are some of the Best MINI Techs in the World.
+1 I'm actually heading over to DT in about an hour for a sway bar install.
 
  #4  
Old 02-21-2009, 11:15 AM
corohio1977's Avatar
corohio1977
corohio1977 is offline
2nd Gear
Thread Starter
Join Date: Apr 2006
Location: East Lansing, MI by way of Cincinnati, OH
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
They can handle all aspects of repairs/installations?
 
  #5  
Old 02-21-2009, 11:31 AM
AutoXCooper.com's Avatar
AutoXCooper.com
AutoXCooper.com is offline
Banned
iTrader: (2)
Join Date: Oct 2005
Location: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
Posts: 3,499
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by corohio1977
They can handle all aspects of repairs/installations?
If it's a MINI Issue I bet they can deal with it.
 
  #6  
Old 02-21-2009, 11:49 AM
corohio1977's Avatar
corohio1977
corohio1977 is offline
2nd Gear
Thread Starter
Join Date: Apr 2006
Location: East Lansing, MI by way of Cincinnati, OH
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
I goggled/google mapped them, just over an hour away -- freakin' sweet. I'll have to take a trip down that way and see what they recommend for my R50. This is about to get good......!!!
 
  #7  
Old 02-21-2009, 12:46 PM
AutoXCooper.com's Avatar
AutoXCooper.com
AutoXCooper.com is offline
Banned
iTrader: (2)
Join Date: Oct 2005
Location: Car Nut Since 1987, Owner Since Fall 2005, Vendor Since Fall 2007
Posts: 3,499
Likes: 0
Received 0 Likes on 0 Posts
I also have an R50 and encourage you to ask Chad for the following setup to get what power you do have to the ground better
DDM CAI
Megan Catback
TSW Damper or IE Motor mounts
BRISK Plugs or sim

Then work on the suspension to get that R50 around the corner faster then ever.

I lived in Lansing for a year a few years ago I bet with the avg Freeway speed out there you can get to DT in less then an hour,

Have fun with DT and your new MINI.
 
  #8  
Old 02-21-2009, 02:47 PM
Big Daddy's Avatar
Big Daddy
Big Daddy is offline
5th Gear
iTrader: (1)
Join Date: Feb 2005
Location: Windsor, ON Canada
Posts: 830
Likes: 0
Received 1 Like on 1 Post
Originally Posted by corohio1977
They can handle all aspects of repairs/installations?
Absolutely! In fact, I just got back from there and my old MCS swaybar is there waiting for you to add it to your Cooper to improve cornering.
 
  #9  
Old 02-21-2009, 03:06 PM
corohio1977's Avatar
corohio1977
corohio1977 is offline
2nd Gear
Thread Starter
Join Date: Apr 2006
Location: East Lansing, MI by way of Cincinnati, OH
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by AutoXCooper.com
I also have an R50 and encourage you to ask Chad for the following setup to get what power you do have to the ground better
DDM CAI
Megan Catback
TSW Damper or IE Motor mounts
BRISK Plugs or sim

Then work on the suspension to get that R50 around the corner faster then ever.

I lived in Lansing for a year a few years ago I bet with the avg Freeway speed out there you can get to DT in less then an hour,

Have fun with DT and your new MINI.
OMG, thanks for all the info!! These are a few of the 'mods' I've been wanting to do. I'm @ 102.8k so it's replacement time!

Oh, my Hotwheels aren't new - he's been around for a while. Though I am debating moving up to a black Clubman S, now that you can have the rear trim in black as well -- a nice addition to my current Cooper.
 
  #10  
Old 02-21-2009, 03:07 PM
corohio1977's Avatar
corohio1977
corohio1977 is offline
2nd Gear
Thread Starter
Join Date: Apr 2006
Location: East Lansing, MI by way of Cincinnati, OH
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Big Daddy
Absolutely! In fact, I just got back from there and my old MCS swaybar is there waiting for you to add it to your Cooper to improve cornering.
Gracias.
 
  #11  
Old 03-08-2010, 07:58 AM
MSUMiniKat's Avatar
MSUMiniKat
MSUMiniKat is offline
Neutral
Join Date: Mar 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Ok, kinda dumb question from a VERY new owner in EL - can the wiper blades be changed at the Jiffy Lube-like places? I've got a streaky one and no time to drive to DET or GR in the next couple of weeks...
 
  #12  
Old 06-23-2010, 12:55 PM
corohio1977's Avatar
corohio1977
corohio1977 is offline
2nd Gear
Thread Starter
Join Date: Apr 2006
Location: East Lansing, MI by way of Cincinnati, OH
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Front blades are a breeze - picked up replacements @ Target. The rear insert, I'm not so sure. I usually have that one swapped out @ the dealer when I'm back in Cincinnati. I would imagine Napa or another auto parts store would have the insert. I did, a while back, order a replacement rear blade thru Moss Mini [www.mossmini.com] - item # 103-926.
 

Last edited by corohio1977; 06-23-2010 at 01:00 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The_Kid
MINI Parts for Sale
3
09-17-2015 01:51 AM
Mini Mania
Drivetrain Products
0
09-10-2015 03:36 PM
ECSTuning
Vendor Announcements
0
09-10-2015 10:52 AM
Mini Mania
Drivetrain Products
0
09-04-2015 08:25 AM
Mini Mania
Drivetrain Products
0
09-02-2015 11:15 AM



Quick Reply: Service Recs in Lansing/East Lansing - or within 150mi



All times are GMT -7. The time now is 06:37 AM.