A Big Thanks
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by Scooby03
I noticed that you had. 
I need to finish a couple of things, then I will head up. Should be there before noon.
I need to finish a couple of things, then I will head up. Should be there before noon.
Steve
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Ok, I'm done with my stuff, and am headed up the hill.
Don't think we need it for anything, but threw in the dremel just incase.
See you in a bit.
Still need new smilley's
:impatient
Don't think we need it for anything, but threw in the dremel just incase.
See you in a bit.
Still need new smilley's
:impatient
4th Gear
Joined: Jan 2006
Posts: 422
Likes: 0
From: Coarsegold
SRTech, thanks for all the work on my car. To bad it was nothing that changed the handling or performance. That will come soon enough. I know this might sound foolish but what is CURV, MCC, ZOOM, and Carve? Ken
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by riversong
SRTech, thanks for all the work on my car. To bad it was nothing that changed the handling or performance. That will come soon enough. I know this might sound foolish but what is CURV, MCC, ZOOM, and Carve? Ken
Steve
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Tech, thanks again
Another succesfull install day.
Your other 1/3 under strut system, and my upper rear control arms.
Someday we will be able to do this in the sunshine.
Brad
Another succesfull install day.
Your other 1/3 under strut system, and my upper rear control arms.
Someday we will be able to do this in the sunshine.
Brad
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Sunshine? What's that? Yes, after some pulling, twisting and shimming, I got the side with the damaged frame rail to work with the M7-USS. And I ended up not having to drill down from the top. No mods for the next two weekends: Ad Agency run next weekend and work the weekend after that.
Steve
Yes, after some pulling, twisting and shimming, I got the side with the damaged frame rail to work with the M7-USS. And I ended up not having to drill down from the top. No mods for the next two weekends: Ad Agency run next weekend and work the weekend after that.Steve
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
3-weeks until another mod day. What will we do.
Bakersfield run next weekend, and Idaho the weekend after.
I put out a meassage on the autocross thread. When I went back and looked it said first come, so I will see what I can find out.
Bakersfield run next weekend, and Idaho the weekend after.
I put out a meassage on the autocross thread. When I went back and looked it said first come, so I will see what I can find out.
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Autocross info,
As long as we are there by 6:30am we will be gaurranteed a spot. Most people don't get there until 7am. I figure we will get there by 6am.
We will go by on Saturday to make sure where it is. So we don't do like we did at Las Vegas Speedway.
As long as we are there by 6:30am we will be gaurranteed a spot. Most people don't get there until 7am. I figure we will get there by 6am.
We will go by on Saturday to make sure where it is. So we don't do like we did at Las Vegas Speedway.
I was lucky enough to be following Brian That sounds good. So, what kinda hotel are we gona be looking at to stay?
That sounds good. So, what kinda hotel are we gona be looking at to stay?
Originally Posted by Scooby03
Autocross info,
We will go by on Saturday to make sure where it is. So we don't do like we did at Las Vegas Speedway.
We will go by on Saturday to make sure where it is. So we don't do like we did at Las Vegas Speedway.