Just finished installing the Ngauge, and one of the gauges is not working. (I have the boost and water temp gauge) But its not that simple. When I start up the car, both gauges will light up and do a dial sweep. But after that, the water temp gauge will not work. I thought it was a faulty connection on one of the daisy chain connectors, so i tried to plug into another connector (all combinations were tried), but still no dice. Then i swapped the master cable from the boost gauge to the water temp. Now the water temp works but not the boost. So now what?

Here is a video of the problem:


Has anyone had this problem?

Im asking here first because Cravenspeed is not open till Monday.

 

Sorry we kept you waiting. Since both gauges work when plugged directly in, that suggests that they were both built as the master gauge by accident. We'll get an exchange out to you as soon as possible.