Interior/Exterior Front Spliter
Front Spliter
HI every boby i just finished my front spliter and now i need those
2 front bracket or universel joint that ajust the spiter ..anybody were to buy
thanck you
MC 2
2 front bracket or universel joint that ajust the spiter ..anybody were to buy
thanck you
MC 2
Last edited by MC 2; Feb 21, 2008 at 05:22 AM.
2nd Gear
Joined: Feb 2008
Posts: 86
Likes: 0
From: Raleigh, NC
Trending Topics
Here is how it made 1/4 marine pliwood, 2 coat of marine epoxie, black paint,
bout after all the fithing a will bring it to my local paint shop (( ps 3hrs of fithing and lots of figuring out))00
bout after all the fithing a will bring it to my local paint shop (( ps 3hrs of fithing and lots of figuring out))00
the ones from ecs don't swivel so they will need to be mounted straight up and down. Here's how they looked:
This was done after the front end was replaced and the body shop mounted them. They put them up too high and I should have done it myself. Luckily for me that splitter ended up being replaced at their cost and I ended up going back to the ones included with the M7 splitter. I have the ECS ones still and an extra set of the M7 turnbuckles so shoot me a PM if your interested
This was done after the front end was replaced and the body shop mounted them. They put them up too high and I should have done it myself. Luckily for me that splitter ended up being replaced at their cost and I ended up going back to the ones included with the M7 splitter. I have the ECS ones still and an extra set of the M7 turnbuckles so shoot me a PM if your interested
Last edited by batrugger; Feb 21, 2008 at 07:52 AM.
6th Gear
Joined: Jun 2006
Posts: 5,692
Likes: 2
Um... what?
Here is the almost finish product..fresh black paint.. I need if someone as the intruction for the 2 front end turnbukcle .. Do u just drill thru the front bumper(plastic) or u have to drill thru the metal parts of the bumper. Any advice is welcome..
MC 2
MC 2
Last edited by MC 2; Mar 10, 2008 at 05:32 PM.
A little off topic, but its a splitter question 
How well do these splitters hold up at high speed *cough 110 cough*?
Also it looks like the attachment point for the control arms to the slitter could be flimsy...has anyone has issues of the splitter cracking at these points?
How well do these splitters hold up at high speed *cough 110 cough*?
Also it looks like the attachment point for the control arms to the slitter could be flimsy...has anyone has issues of the splitter cracking at these points?
5th Gear
Joined: Mar 2006
Posts: 692
Likes: 91
MC 2, your splitter looks great. I have been thinking of doing one myself, but have been putting it off. You have inspired me to get off my ...... It looks like you were able get the contour perfect. Do you have advice, sketches, specs, plywood source, etc. Anything that you could share would be greatly appreciated.
Waoh it took me a while to realize that you actually made this splitter 
great job that seems like it would be a lot more cost effective than buying a $250 splitter, plus you get free reign of design
great job that seems like it would be a lot more cost effective than buying a $250 splitter, plus you get free reign of design
Well the spliter is for down force on the car push the car down more traction
and steir..And for tha most the cost +/- 20$plywood ..20$ marine epoxie
40$ paint local paint chop. plus $$$$ of figurin out and sentering the spliter..
MC 2
and steir..And for tha most the cost +/- 20$plywood ..20$ marine epoxie
40$ paint local paint chop. plus $$$$ of figurin out and sentering the spliter..
MC 2
Longboard
for very good guy u are for sending me the two drop link to finish my project..