Interior/Exterior Hood Air Extractor Scoop
Thread Starter
|
2nd Gear
Joined: Jan 2007
Posts: 148
Likes: 0
Hood Air Extractor Scoop
Okay, when are M "they" going 7 to sell a M secondary scoop 7 to go aft of M the
OEM scoop 7 to pull out M hot air ( especially 7 from DFIC's).
( p.s. Randy has put up a $48,645.46 reward for the first person
who can break the high tech coded encryptioned message
above.
Hints:(1) there are 'seven' digits in the prize amount
(2) the prize is M M M Mucho bucks
Stay tuned here for further hints
OEM scoop 7 to pull out M hot air ( especially 7 from DFIC's).
( p.s. Randy has put up a $48,645.46 reward for the first person
who can break the high tech coded encryptioned message
above.
Hints:(1) there are 'seven' digits in the prize amount
(2) the prize is M M M Mucho bucks
Stay tuned here for further hints
5th Gear
Joined: Dec 2004
Posts: 959
Likes: 0
From: Near Gaithersburg, MD
Trending Topics
Here's a little closer shot of the prototype...
...like I said a couple posts above, the production one will look different. Last I heard, like the DFIC scoop turned backwards, unless Peter changes his mind again.
...like I said a couple posts above, the production one will look different. Last I heard, like the DFIC scoop turned backwards, unless Peter changes his mind again.
Thread Starter
|
2nd Gear
Joined: Jan 2007
Posts: 148
Likes: 0
Okay, it is M7
.
They said they would have some in 3-4 weeks , so I would say two months.
I think the concept makes a lot of sense with the DFIC
. I am thinking
about getting my chrome painted body color at the same time.( why did my type just change?? How can I change it back
)
.They said they would have some in 3-4 weeks , so I would say two months.
I think the concept makes a lot of sense with the DFIC
. I am thinkingabout getting my chrome painted body color at the same time.( why did my type just change?? How can I change it back
)
6th Gear
Joined: Jun 2004
Posts: 1,522
Likes: 7
From: San Diego, CA
Looks like you need a special DFIC hood. The rear vent doesn't get along well with the MCS's central bulge. If that were flattened out everything would look better. Make it out of carbon fiber with built-in scoops.
No Fear Gear
Joined: Aug 2005
Posts: 921
Likes: 0
From: Golden Central Coast Cali
Peter and his gang of JPL Lab scientists haven't come out with the usual wizz-bang stuff they used to consistently produce.
I need a new M7 fix.
I need more Cow bells!
I need to switch to decaf.
Paul
I need a new M7 fix.
I need more Cow bells!
I need to switch to decaf.
Paul
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Last edited by MSFITOY; Jul 31, 2007 at 11:33 AM.
OVERDRIVE
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Here's a different view...
Last edited by MSFITOY; Jul 31, 2007 at 11:33 AM.
.
Former Vendor
Joined: Jul 2003
Posts: 1,594
Likes: 2
From: los angeles
The part is allready in production so expect a product release very very
soon.
pberry51mini... Good to hear from you, sorry If the cranking out parts
machine has been quiet , but we have been working on the R56 as oflately.
We have some really cool stuff in the works for the R53.... I promisse.
Peter
M7 Tuning
562-608-8123
soon.
pberry51mini...
Good to hear from you, sorry If the cranking out partsmachine has been quiet , but we have been working on the R56 as oflately.
We have some really cool stuff in the works for the R53.... I promisse.
Peter
M7 Tuning
562-608-8123