How To Trunk lid grip button not working – DIY
#104
I removed the motor and direct wired it to the battery. It worked all 5 times I tried. All the wiring checks out all the way to the plug. Something is wrong from the boot/trunk to wherever it gets power. All the wiring in the rubber sleeve is intact.
Thank you for taking the time to answer this thread.
Thank you for taking the time to answer this thread.
#105
Ok so it's not getting 12 volts... Did you check the relay?
I use a LoadPro which loads the circuit to see if it truly is carrying enough voltage. Any minor corrosion will cause a circuit failure even though it shows continuity.
I use a LoadPro which loads the circuit to see if it truly is carrying enough voltage. Any minor corrosion will cause a circuit failure even though it shows continuity.
I removed the motor and direct wired it to the battery. It worked all 5 times I tried. All the wiring checks out all the way to the plug. Something is wrong from the boot/trunk to wherever it gets power. All the wiring in the rubber sleeve is intact.
Thank you for taking the time to answer this thread.
Thank you for taking the time to answer this thread.
#109
Yep thats the one that fits under the bumper for people with comfort access. Once you fix that the comfort access will work and unlock the tail gate. Most MINIs dont have the CA option. Also Make sure if you have CA that the battery in the key fob remote (second one) is new.
https://www.ecstuning.com/b-genuine-...a/61356922212/
https://www.ecstuning.com/b-genuine-...a/61356922212/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
RandyR90S
R56 :: Hatch Talk (2007+)
3
05-14-2014 11:42 AM