today is tuesday, 08/19/03 - i know i promised to put up a sample picture last week but haven't had a chance to do it yet...i *will* do it by the end of this week, however :smile: btw, a friend of mine is making these for me and he has been sick this week.

so far, i have a sample of a stainless steel plate that attaches to the lower two screws of the plastic license plate holder and it holds 3 stickers (2 safety check, 1 recon for those who will be getting it).

the 2 sticker holder (safety check) will be made to screw into the two screws on the right of the license plate holder.

of course, you can use either one if you're not planning to get recon but you'll have some of the plate showing....or you can put some other stickers on it :smile:

more to come, i promise

i will have prices in my next post as well....

 

Thanks for your hard work, mini-t

 

:smile:

 

Ideal

 

mini-t
Thanks for the picture and for working on this.
Did you know that for all new MINIs sold after July that the safety inspection stickers being issued for new cars is good for TWO full years? Yup.
I got ripped off!
you know they might charge the customer for the higher cost of the safety sticker- not sure if it is still $15 if it is for 2 years and not one.

 

mini-t - I'm definitely interested. I'll await your official group buy post.

You say that the 2-sticker holder mounts to the right. Can it also be mounted to the left?

Thanks again for taking charge of these GBs. :smile:

 

>>You say that the 2-sticker holder mounts to the right. Can it also be mounted to the left?
>>

Sullivan'sDaddy -- yes, the 2-sticker holder can also be mounted to the left. i'll try to get a sample made on monday and have pictures up shortly thereafter.