When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
General MINI TalkShared experiences, motoring minutes, and other general MINI-related discussion that applies to all MINIs, regardless of model, year or trim.
New NAPA 060532 belt
New Face lift Crank Pulley ( 3rd one - didn't fail but has ton mileage on it )
New Chain Tensioner ( Also didn't fail but had ton mileage on it )
Boost spools up so much quicker with really nice super smooooooth "torque" band. .
Took the antenna, base and all, off my mini this morning. Had to take off nearly every trim panel in the back of my mini to do it right but didn't end up with any creases so it was time well spent (around 2 hours all told). While they were off I removed both rear seat belts (does anyone know of a cool way to fill those holes?). Lastly did a pro patch job to the hole my antenna left. Beer bottle cap + hot-melt + black duct tape = good enough for now.
Prepped the "new" low mile SC to go in next weekend. The oil I drained out was very clean and probably could have stayed had I known. But I filled both ends up with brand new GM SC oil and put the 15% pulley on. Cannot waaaait to install this.
Taught my daughter how to loosen and tighten the lug bolts in a criss-cross pattern when rotating the tires because she insisted on helping me. I figured she might as well get comfortable using tools so she doesn't depend on a guy to do it for her when she gets older. lol.
Prepped the "new" low mile SC to go in next weekend. The oil I drained out was very clean and probably could have stayed had I known. But I filled both ends up with brand new GM SC oil and put the 15% pulley on. Cannot waaaait to install this.
Took the antenna, base and all, off my mini this morning. Had to take off nearly every trim panel in the back of my mini to do it right but didn't end up with any creases so it was time well spent (around 2 hours all told). While they were off I removed both rear seat belts (does anyone know of a cool way to fill those holes?). Lastly did a pro patch job to the hole my antenna left. Beer bottle cap + hot-melt + black duct tape = good enough for now.
And why did you remove the antenna and attempt to fill it in with beer bottle cap? How would you have gotten creases? What was the goal?