Official Automatic Transmission Owners' Club
#852
UPDATE!!!!
Transmission fixed. After extensive troubleshooting I found the output rotation speed sensor was bad. After removing it, I examined the actual wiring and noticed that protective sheathing of the wiring was split exposing all the internal wiring. Of course the copper was exposed and some of it was corroded. I then ordered the new sensor. Now installed the Cooper is ready for inspection and registration.
docsigns
Transmission fixed. After extensive troubleshooting I found the output rotation speed sensor was bad. After removing it, I examined the actual wiring and noticed that protective sheathing of the wiring was split exposing all the internal wiring. Of course the copper was exposed and some of it was corroded. I then ordered the new sensor. Now installed the Cooper is ready for inspection and registration.
docsigns
#854
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Vendor Announcements
0
08-19-2015 12:51 PM
ECSTuning
Vendor Classifieds
0
08-19-2015 08:27 AM