Hello all,



I was doing maintenance on my cooper s and found that there is an oil leak coming from the front main seal (based on the location of the oil leak is how i determined). I was wondering if anyone has performed this replacement or would have knowledge one how to do this repair? I do know that for the belt tensioner pulley that there is a special tool (CTA-3884).



Thanks!

 

https://www.ecstuning.com/b-baum-too...l/2365291~btu/
https://www.ecstuning.com/b-genuine-...302365291~oeb/

The seal is here, i have not seen anyone do this on a Gen 3 Cooper S yet.

https://www.ecstuning.com/b-genuine-...l/11118664905/

Here is the tool:

https://www.ecstuning.com/b-cta-tool...r/cta3881~cta/