Electrical Power through the firewall?
Power through the firewall?
I'm not sure this is the right place to post this, but what the heck. So, I need a place to run a wire from the engine bay to the cockpit. it would be equvilent to the size of 2 0/2gage wires. Thanks for any help.
Addison
Addison
See page 7 of the OEM driving light instructions.
It shows you the grommet you need to go through, as well as one possible path for the wiring.
It shows you the grommet you need to go through, as well as one possible path for the wiring.
See page 7 of the OEM driving light instructions.
It shows you the grommet you need to go through, as well as one possible path for the wiring.
It shows you the grommet you need to go through, as well as one possible path for the wiring.
6th Gear
Joined: Oct 2006
Posts: 8,639
Likes: 0
From: Fresno, Ca.
See page 7 of the OEM driving light instructions.
It shows you the grommet you need to go through, as well as one possible path for the wiring.
It shows you the grommet you need to go through, as well as one possible path for the wiring.
Is there anything you don't know about?
Joined: Feb 2003
Posts: 1,825
Likes: 1
From: Silver Spring, MD
Depending on where you are going with the wire you could always go from the battery in the boot, forward.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Navigation & Audio How much power do you get through the Y-cable--and can it be increased?
twriter
Navigation & Audio
8
Oct 2, 2015 03:14 PM
paul7878
1st Gen Countryman (R60) Talk (2010-2015)
4
Sep 14, 2015 07:44 AM