Drivetrain AutoWeek article M7tuning + FTR
6th Gear
Joined: Jan 2005
Posts: 1,719
Likes: 1
From: New Brunswick, NJ
Originally Posted by isellem
did you guys ever get the dyno charts for the 202hp at the wheels? just curious... not an attack
https://www.northamericanmotoring.co...=cosworth+dyno
202 whp, ~156 wheel lb ft
Former Vendor
Joined: Dec 2005
Posts: 306
Likes: 0
From: Richmond, VA
Originally Posted by ///ACS330Ci
What caught my eye was "Horvath is adding new parts all the time. He recently added an intercooler, under-strut system, strut tower braces and shock tower stiffeners. A shifter kit is in CAD right now."
What intercooler???
What intercooler???
Full press release on the new intercooler within the next couple of days!
6th Gear
Joined: Jan 2006
Posts: 1,808
Likes: 3
Originally Posted by ingsoc
Most MCS's are slightly above what they're rated, though. '05s and '06s are on average even stronger than '04s. I've heard of one dynoing ~170 whp, STOCK! What did yours dyno at, Larry? I would wager higher than 150 whp, from the experience of others with your same mods. If you added a Cosworth, I bet that you'd get still more power than you already have, simply put.
Cos the MCS keeps up with a lot of cars that have a higher power to weight ratio (that are stated by the car companies) that is. Like the clio 182. My mate's Clio 182 is slower than my car, and we both have intakes. I have MTH tho, but even still, i monster him, it's a walk over. I'd put my money on my car have a fair bit more than 170bhp
5th Gear
Joined: Aug 2004
Posts: 1,079
Likes: 1
From: AZ
Originally Posted by Will @ M7 Tuning
Horvath!? I'm going to have to have a talk with our press guy, I'm feeling left out!
Full press release on the new intercooler within the next couple of days!
Full press release on the new intercooler within the next couple of days!
OK, I guess I might as well ask about the shifter kit too then?Also, any chance of you all coming out with a rear upper stress bar to complement your front STB and USS? I'd like mine in black
Former Vendor
Joined: Dec 2005
Posts: 306
Likes: 0
From: Richmond, VA
Originally Posted by ///ACS330Ci
OK, I guess I might as well ask about the shifter kit too then?Also, any chance of you all coming out with a rear upper stress bar to complement your front STB and USS? I'd like mine in black
Is that the proper answer? hehe
Both? 
6th Gear
Joined: Jan 2005
Posts: 1,719
Likes: 1
From: New Brunswick, NJ
Thread
Thread Starter
Forum
Replies
Last Post