I have a mcs '05 is eb/w sport web wheels and white stripes.and i want to added alta cai,15% pulley,giac ecu,2% crank pulley,obx header,miltek exhaust,m7 400cc injectors,m7 throttle,alta big intercooler and the question is . How much HP can i expected and more or less what time in a 1/4 mile?
Thank's for all the advised!!!!!!
This side is really fun ....

 

i'd wager about 200 whp.... close to 240 at the crank...

but then likely speculations, do a dyno run before and after and show us the gains!

 

Just did a drag day with the PSMINI.ORG Club. There were 2-JCW an 05 and 04 1- 02 MCS/Dinan stage 5 1-03 MCS (Mine see mods below) 05 MCSC 17% pulley. 03 MCS Stock. The stock ran 15.8 the others ran 15.2 to 15.6. The JCW,Dinan and mine were with-in 100ths of a second apart. You can expect 200hp + and low 15s or high 14s in the 1/4 mile.

 

thank's guys when i put all the stuffs i test in the dyno and tell you how much it gain. that's more or less what i want to gain.

 

I don't think that'll make the magical 200 whp. I am guessing low 190s at most. This also depends on how 'strong' your car is from the factory. You willl almost certainly need head work to get to 200. All of the breathing apparatii (in and out) will be limited by the amount that you head can flow somewhere in the 190 whp range, I honestly think. I also don't know what the giac ecu will do. It doesn't have stellar hp #'s, from what I've seen. You'll definately need colder plugs with the mods above, also. Good luck!

 

hi thank's for advised but let see how much hp i can gains with out touch the head at this moment remember this monday the dealer give me my mini.and i want to put only bolt-on parts in case of any damage don't lose the waranty.

 

Look for the posts by JCampos where he says that he was trying to get 200 without touching the head and cam. You'll see that he did just about everything possible and was using a custom Unichip, but last I heard he had not reached it. Good luck, though! A lot of people have been hoping it was possible.

 

thank's
as soon as i put all the mods i give you my results.for more advised if i needed.

 

i have a 15% pulley and a jcw intake and injectors... thats it... i run 14.6-14.8's consistantly... (dependant on whether conditions and how many runs i make... when it gets heat soaked i start to run the 14.8's) This is with stock everything else including crappy runflat tires and s lites...

ohh yeah and these were all run when the temp outside was between 95-110 degrees in hot a$$ PHOENIX!

 

you don't have header,exhaust,throttle,ecu with only those mods it runs hard!!