Drivetrain Best Catch Can Out there?
#3
Our ECS system has a great design, but you will have to tap in your own hose connection. M7 is an exact fit but they use a mesh metal filter which works, just a simple way. We have not really put them up head to head to test. I dont think you can go wrong with either.
ECS one is Engineered and manufactured in the USA.
https://www.ecstuning.com/b-ecs-part...ine-emissions/
https://www.ecstuning.com/b-m7-speed...ine-emissions/
ECS one is Engineered and manufactured in the USA.
https://www.ecstuning.com/b-ecs-part...ine-emissions/
https://www.ecstuning.com/b-m7-speed...ine-emissions/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 05-25-2023 at 09:31 AM.
The following users liked this post:
ghostwrench (06-24-2023)
#4
Unfortunately I won't be installing mine until next weekend, but I just got a cheapo from Amazon:
All aluminium, baffled, O-Ring seal for the canister itself, plus I prefer the dipstick to the sight tube, less places to have a vacuum leak.
https://www.amazon.com/Ruien-0046-Universal-Aluminum-Reservoir/dp/B06XK9PTP7/ref=mp_s_a_1_3?keywords=oil+catch+can&qid=1553887619&s=gateway&sr=8-3
All aluminium, baffled, O-Ring seal for the canister itself, plus I prefer the dipstick to the sight tube, less places to have a vacuum leak.
The following users liked this post:
Mortification (05-14-2019)
#5
Unfortunately I won't be installing mine until next weekend, but I just got a cheapo from Amazon:
https://www.amazon.com/Ruien-0046-Un...gateway&sr=8-3
All aluminium, baffled, O-Ring seal for the canister itself, plus I prefer the dipstick to the sight tube, less places to have a vacuum leak.
https://www.amazon.com/Ruien-0046-Un...gateway&sr=8-3
All aluminium, baffled, O-Ring seal for the canister itself, plus I prefer the dipstick to the sight tube, less places to have a vacuum leak.
I did the same. Got one on amazon. Have yet to install it but I’ve learned they all do the same **** lol. I’ve compared eBay ones with high end ones for my N54 cars and they basically a relabeled can lol
#6
Vendor
iTrader: (10)
We offer several and the BSH is a complete kit
https://www.waymotorworks.com/bsh-oi...h-can-r53.html
But with an R53 it is easy to just get a can and plumb it in, as I find the Mishimoto cans to be great.
https://www.waymotorworks.com/mishim...catch-can.html
https://www.waymotorworks.com/bsh-oi...h-can-r53.html
But with an R53 it is easy to just get a can and plumb it in, as I find the Mishimoto cans to be great.
https://www.waymotorworks.com/mishim...catch-can.html
#7
Go cheap with some stainless steel scrubbers in there to act as a filter. Just make sure to install it correctly......NOT the way Alta or M7 say to.
Run the line from the passenger side valve cover line to the can and then reconnect it to the hard line under the IC. LEAVE the other side as it is.
Run the line from the passenger side valve cover line to the can and then reconnect it to the hard line under the IC. LEAVE the other side as it is.
Trending Topics
#8
The following users liked this post:
FrankMstein (05-25-2023)
#11
Thread
Thread Starter
Forum
Replies
Last Post
Lex2008
R56 :: Hatch Talk (2007+)
9
08-12-2021 11:44 AM