Drivetrain (Cooper S) MINI Cooper S (R53) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain 60 to 80 times in third gear

Thread Tools
 
Search this Thread
 
Old Oct 7, 2004 | 05:58 AM
  #26  
greatgro's Avatar
greatgro
6th Gear
Joined: Jun 2002
Posts: 3,359
Likes: 1
From: New Jersey
Originally Posted by dgszweda1
With your statement on stickier tires, are you saying that you were getting wheel spin in third gear at 60 miles on hour?, wheel spin in fourth gear at 60mph? I find that hard to believe.
No, you're right. I wrote that wrong. I meant to just mention the weight of the tires for those times. The sticky tires would have helped tremendously in first.
 
Reply
Old Oct 7, 2004 | 06:51 AM
  #27  
MSFITOY's Avatar
MSFITOY
Thread Starter
|
OVERDRIVE
20 Year Member
Liked
Loved
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Originally Posted by El Diablito Rojo-N20Mini
hand grenade?
Just kiddn. What kind of mods do you have and under what conditions were you running in...temp, elevation?
 
Reply
Old Oct 7, 2004 | 06:54 AM
  #28  
greatgro's Avatar
greatgro
6th Gear
Joined: Jun 2002
Posts: 3,359
Likes: 1
From: New Jersey
Originally Posted by MSFITOY
Just kiddn. What kind of mods do you have...
I think he answered that with "only thing I am missing is.... M7 cold air intake and ECU tuning". :smile: So I'm thinking 15-19% pulley, head, header, exhaust, cams, plugs, etc...

But yeah - specifics would be nice.
 
Reply
Old Oct 7, 2004 | 07:04 AM
  #29  
Bisch's Avatar
Bisch
6th Gear
Joined: Jun 2003
Posts: 1,432
Likes: 0
He mentioned all of his mods in another thread...I'll search....but yes, it was just about all of the toys on the market!
 
Reply
Old Oct 7, 2004 | 07:05 AM
  #30  
Bisch's Avatar
Bisch
6th Gear
Joined: Jun 2003
Posts: 1,432
Likes: 0
...here they are...

here are the mods.... painting , gauge pod with boost gauge and air/fuel ratio electronic gauge, 15%pulley, M7 flywheel/pressure plate, cylinder head port/polish w/large exhaust valves, schrick cam, M7 cold air intake, Borla exhaust, H-sport Comp sway bar, M7 droplinks, M7 400cc fuel injectors, M7 venom nitrous, M7 oil catch can, M7 ultimate grille, M7 thermostat, M7 front control arms w/delrin bushing system, H sport control arms and front camber plates, Wilwood big brake kit, Ro-ja Lt5 wheels, Phantom grip limited slip, leda shocks/springs, B&M short shifter and 4 tires yet to be determined.... Peter says it will be done by Saturday.... I am holding him to it....
 
Reply
Old Oct 7, 2004 | 07:13 AM
  #31  
MSFITOY's Avatar
MSFITOY
Thread Starter
|
OVERDRIVE
20 Year Member
Liked
Loved
Joined: May 2003
Posts: 7,926
Likes: 40
From: Greensboro, NC
Originally Posted by Bisch
...here they are...

here are the mods.... painting , gauge pod with boost gauge and air/fuel ratio electronic gauge, 15%pulley, M7 flywheel/pressure plate, cylinder head port/polish w/large exhaust valves, schrick cam, M7 cold air intake, Borla exhaust, H-sport Comp sway bar, M7 droplinks, M7 400cc fuel injectors, M7 venom nitrous, M7 oil catch can, M7 ultimate grille, M7 thermostat, M7 front control arms w/delrin bushing system, H sport control arms and front camber plates, Wilwood big brake kit, Ro-ja Lt5 wheels, Phantom grip limited slip, leda shocks/springs, B&M short shifter and 4 tires yet to be determined.... Peter says it will be done by Saturday.... I am holding him to it....
Oh yeah...I remeber now. I think I'd OD if had all that at one time

I wonder what the bill was...
 
Reply
Old Oct 7, 2004 | 07:21 AM
  #32  
Bisch's Avatar
Bisch
6th Gear
Joined: Jun 2003
Posts: 1,432
Likes: 0
Originally Posted by MSFITOY
I wonder what the bill was...
I wonder what the bail will be...!

 
Reply
Old Oct 7, 2004 | 07:21 AM
  #33  
05JCWS's Avatar
05JCWS
6th Gear
Joined: Jul 2003
Posts: 1,469
Likes: 0
From: Atlanta/Amsterdam
Is it even a Mini any more? At what point does a Mini not be a Mini anymore, and becomes a kit car?

I am really curious at the cost. That must be between $10,000-$15,000. That is a lot to put on a brand new car. For that much you could have gotten an M3. But still may not have been as much fun.
 
Reply
Old Oct 7, 2004 | 07:28 AM
  #34  
Bisch's Avatar
Bisch
6th Gear
Joined: Jun 2003
Posts: 1,432
Likes: 0
[QUOTE=dgszweda1]Is it even a Mini any more? At what point does a Mini not be a Mini anymore, and becomes a kit car?

QUOTE]

When this becomes your frame:


and this your engine:


ala Qvick.
 
Reply
Old Oct 7, 2004 | 08:28 AM
  #35  
El Diablito Rojo-N20Mini's Avatar
El Diablito Rojo-N20Mini
Banned
Joined: Aug 2004
Posts: 864
Likes: 0
From: So Cal
Originally Posted by Bisch
I wonder what the bail will be...!


LOL... you guys are funny.... btw.. I have 35k into my car and just added the AVIC-N1 to it ... so I just dumped another 2k into it.... could I have bought something else.... sure... BUT THEN I WOULDN"T OWN A MINI.....
 
Reply
Old Oct 7, 2004 | 09:37 AM
  #36  
El Diablito Rojo-N20Mini's Avatar
El Diablito Rojo-N20Mini
Banned
Joined: Aug 2004
Posts: 864
Likes: 0
From: So Cal
Originally Posted by El Diablito Rojo-N20Mini
LOL... you guys are funny.... btw.. I have 35k into my car and just added the AVIC-N1 to it ... so I just dumped another 2k into it.... could I have bought something else.... sure... BUT THEN I WOULDN"T OWN A MINI.....

just so you know... That is 35k TOTAL.... I bought my car used with 3300 miles on it for 20k.....
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bublik
Stock Problems/Issues
13
Feb 18, 2023 11:09 AM
bjcarter2
MINI Parts for Sale
42
Aug 31, 2015 04:03 PM
ECSTuning
Vendor Announcements
0
Aug 12, 2015 01:24 PM
Colt45Magnus
R56 :: Hatch Talk (2007+)
21
Aug 12, 2015 06:43 AM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM




All times are GMT -7. The time now is 08:54 AM.