Drivetrain Manic tune and CEL
Thread Starter
|
2nd Gear
Joined: Jan 2013
Posts: 128
Likes: 6
From: Central Texas
Manic tune and CEL
Hello all,
I have a gp2 with a Manic tune stage and when running agressive get the CEL. Anyone else have this?
Usually goes away the next time I start the car.
Cheers
I have a gp2 with a Manic tune stage and when running agressive get the CEL. Anyone else have this?
Usually goes away the next time I start the car.
Cheers
mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
Thread Starter
|
2nd Gear
Joined: Jan 2013
Posts: 128
Likes: 6
From: Central Texas
No, running the recommend plugs. NGK (1422) ILKR8E6
Last edited by roadrunner255; Sep 16, 2016 at 05:46 AM.
Thread Starter
|
2nd Gear
Joined: Jan 2013
Posts: 128
Likes: 6
From: Central Texas
FYI I have a catless dp installed and
I did install the catless DP and NM engineering hi flow air intake box 658858 and their turbo hi flow down pipe 488856 before the tune was installed.
Cheers!
36BE
Coding: no variant
Error will not cause a warning light
Error is currently present
Test conditions have been completed
2D20
Oxygen sensor behind catalytic converter, electrical: intercore short circuit or oxygen sensor contaminated
Error will cause a warning light
Error is not currently present
Test conditions have been completed
3106
Catalytic converter: efficiency below limit value
Error will cause a warning light
Error is not currently present
Test conditions have been completed
2C57
Charge-air pressure control, lower value: charge-air pressure too low
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
2905
Intake-air system: suspected leak between turbocharger and inlet valves
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
I did install the catless DP and NM engineering hi flow air intake box 658858 and their turbo hi flow down pipe 488856 before the tune was installed.
Cheers!
36BE
Coding: no variant
Error will not cause a warning light
Error is currently present
Test conditions have been completed
2D20
Oxygen sensor behind catalytic converter, electrical: intercore short circuit or oxygen sensor contaminated
Error will cause a warning light
Error is not currently present
Test conditions have been completed
3106
Catalytic converter: efficiency below limit value
Error will cause a warning light
Error is not currently present
Test conditions have been completed
2C57
Charge-air pressure control, lower value: charge-air pressure too low
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
2905
Intake-air system: suspected leak between turbocharger and inlet valves
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Last edited by roadrunner255; Sep 16, 2016 at 10:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Drivetrain Timing Chain and Head Rebuild
MiniInTheSprings
Drivetrain (Cooper S)
12
Sep 9, 2016 11:21 AM