Drivetrain (Cooper S) MINI Cooper S (R53) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain big POWER and cooper S

Thread Tools
 
Search this Thread
 
Old May 5, 2004 | 10:12 AM
  #1  
transporter_E38's Avatar
transporter_E38
Thread Starter
|
Neutral
Joined: May 2004
Posts: 1
Likes: 0
From: los angeles
so how do i go about getting the most power out of my cooper S without swapping an s54 bmw engine in there?
 
Reply
Old May 5, 2004 | 10:23 AM
  #2  
TwOMINIs's Avatar
TwOMINIs
6th Gear
Joined: Dec 2002
Posts: 1,172
Likes: 1
From: Wisconsin
Welcome to NAM. Do a search here and you will find lots of information. :smile:

There are lots of other mods that can be done to 'tweek' a few more 'ponies' but the above are the most popular and give you the most bang for the buck in the order listed.

Good luck.

<A HREF="https://www.northamericanmotoring.com/albums/album04/Mini_X_2b1.jpg" TARGET="_blank">
His, Chile RED over, Madness intake, Magnaflow exhaust, Helix 15% Pulley &amp; RDR Swaybar
Hers, Electric Blue / Union Jack on top and BONE Stock
 
Reply
Old May 5, 2004 | 10:24 AM
  #3  
weaverpsu's Avatar
weaverpsu
5th Gear
20 Year Member
Liked
Joined: Sep 2002
Posts: 669
Likes: 7
From: Colorado
welcome to NAM. please try the search function and you will find exactly what you are looking for.
if you swapped engines it wouldn't be a MINI anymore.
But an answer anyways.

replace supercharger pulley with smaller one. 15% is most common, and for the more brave a 17%, and 19% in reduction. Just FYI the John Cooper Works uses a 13.8% reduction pulley. Best bang for the buck is the pulley, getting you around 16hp and 16lbs of torque. intake won't give you much but once you add other things it is more helpful. Will give you a couple extra horses. Exhaust will give you about 5-9 extra HP as well. And then finally a chip will give you another 10+ HP. Replacing the head is costly but early numbers are pretty good. Do lots of research first to find what you want exactly.
 
Reply
Old May 5, 2004 | 12:55 PM
  #4  
greatgro's Avatar
greatgro
6th Gear
Joined: Jun 2002
Posts: 3,359
Likes: 1
From: New Jersey
Just FYI the John Cooper Works uses a 13.8% reduction pulley.
If a 15% reduction is 2.18 and the JCW is 2.21, then the JCW pulley is an even 14.0%.
 
Reply
Old May 5, 2004 | 01:01 PM
  #5  
MSFITOY's Avatar
MSFITOY
OVERDRIVE
20 Year Member
Liked
Loved
Joined: May 2003
Posts: 7,926
Likes: 41
From: Greensboro, NC
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$
 
Reply
Old May 5, 2004 | 01:03 PM
  #6  
sdanaher's Avatar
sdanaher
4th Gear
Joined: Aug 2003
Posts: 571
Likes: 4
everyone says lighter wheels.

i say.. LESS wheels!! Cutoff half the car and install 1 3rd wheel in the rear. If you are using the stock s-lites you will lose like 40lbs of rotating mass.

that will definitely make you feel more powerful!!
 
Reply
Old May 5, 2004 | 01:40 PM
  #7  
Tokio's Avatar
Tokio
2nd Gear
Joined: May 2003
Posts: 147
Likes: 0
From: Ft.Lauderdale
I lemoned my mini several weeks ago.

I'm not sure if it has more HP now but it does go a lot faster and wheel spin is furious while I am waiting for BMW to give me back my cash.

The car was Lemoned due to the yoyo that BMW tried to fix 6 times and eventually said it was a characteristic of the car - just in case you wanted to know.





_________________
'03 S DS
 
Reply
Old May 5, 2004 | 09:37 PM
  #8  
minihune's Avatar
minihune
OVERDRIVE - Racing Champion
20 Year Member
Joined: Feb 2003
Posts: 15,262
Likes: 72
From: Mililani, Hawaii
&gt;&gt;so how do i go about getting the most power out of my cooper S without swapping an s54 bmw engine in there?

Transporter_E38,

Aloha from Hawaii and welcome to NAM.
First question is do you want to keep your MINI warranty or do you not really care about it at all? Next is what is your budget and what do you want to do with this powerful MINI if you could do it?

IF you wish to retain a warranty then the JCW kit plus more of the full track upgrades from Cooper works might be worth a look. Or the new DINAN stage 2 upgrade kit for the MCS and full suspension/wheel/ everything upgrades that are coming this year would be also good but they are not yet released.

New JCW kits-
https://www.northamericanmotoring.co...mp;topic=25520

If you have about $5000 to $7000 and want to get power up in the 210+ HP range then just call Randy Webb at Webbmotorsport.com or Eric Savage at helix13.com and get talking about doing power mods for the MCS. There is much to be done to the engine, suspension, wheels, etc. But it all voids the warranty on the MINI.

Here are a few threads to read on upgrades for the MCS-
https://www.northamericanmotoring.co...amp;topic=6354
https://www.northamericanmotoring.co...mp;topic=13289
https://www.northamericanmotoring.co...mp;topic=16198
https://www.northamericanmotoring.co...mp;topic=22805




_________________
Aloha Hawaii
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
Gil-galad
Eastern Iowa MINIs
63
Nov 17, 2016 02:54 PM
jeffbeckhudd
Navigation & Audio
1
Aug 29, 2015 09:11 PM
FrostyFox
MINIs & Minis for Sale
0
Aug 12, 2015 02:33 PM
PatrikKN
1st Gear
8
Aug 5, 2015 09:10 PM




All times are GMT -7. The time now is 03:40 AM.