So I just bought a sprint booster v2 from a member here and the plug in for the led switch looks like one of the wires is broken. There is a red and white wire that comes out of the switch and at the end where the plug goes into the sprint booster only the red wire goes into the plug and the white wire ends in a splay of copper wire ends. I just want to know from other sprint boost owners if both wires should end inthe plug. If they do I'll just fix it. If not then Ill install it. Here's a pic in the next post

 

Here's a pic
http://i1304.photobucket.com/albums/...ps227b2b21.jpg

 

Pull the pins out of the connector and see if its been used.

 

I looked at the sprint booster sitting on my desk and both wires are connected.

 

Awesome thanks that's what I needed to know!

 

There are a few options for the throttle response problems. Anybody have info on some of the other ones?
Sorry for the hijack)