Drivetrain engine swap
#3
#4
what do you mean, "am I looking?" If you mean would I buy it tommorow, well no, but i have plans and ambitions, and this info would be helpful.
I had also thought about the parts department, but they are not usually terribly helpful, so I thought I would check here first.
cheers, jason
I had also thought about the parts department, but they are not usually terribly helpful, so I thought I would check here first.
cheers, jason
#5
I've heard it's $3500 from the factory.
We discussed this a bit here:
https://www.northamericanmotoring.co...mp;topic=22603
-Rob
We discussed this a bit here:
https://www.northamericanmotoring.co...mp;topic=22603
-Rob
#7
Its not as difficult as everyone is making out if your willing to ditch the blower. I won't talk about a turbo but here goes.
You can put the block and trannny into an MC. I am currently doing just that. In a nut shell, the following have been the probs to date.
1) There are some minor harness issues but not enough to make a difference.
2) Since I'm not putting the S head on (I'm putting a big valve MC head on), the intake , TB, and associated parts fit beautifully.
3) Mounting the alternator, nothing hige just won't fit right yet.
The ECU isn't a prob since I will be using my MC one and get a OneClick with my mods.
All in all , I wanted a stronger tranny and bottom end capable of handling a good bit of boost and I got. All for the 2800 (including shippin) I spent plus the modes I've already done.
And the joy of doing it
You can put the block and trannny into an MC. I am currently doing just that. In a nut shell, the following have been the probs to date.
1) There are some minor harness issues but not enough to make a difference.
2) Since I'm not putting the S head on (I'm putting a big valve MC head on), the intake , TB, and associated parts fit beautifully.
3) Mounting the alternator, nothing hige just won't fit right yet.
The ECU isn't a prob since I will be using my MC one and get a OneClick with my mods.
All in all , I wanted a stronger tranny and bottom end capable of handling a good bit of boost and I got. All for the 2800 (including shippin) I spent plus the modes I've already done.
And the joy of doing it
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
Knuckle14
R60 :: Countryman Talk (2010-2015)
4
08-26-2015 08:10 PM