Drivetrain (Cooper S) MINI Cooper S (R56) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain Magnaflow exhaust part 16815 Good idea?

Thread Tools
 
Search this Thread
 
Old Mar 6, 2011 | 06:53 PM
  #26  
AlbanyRocs's Avatar
AlbanyRocs
Thread Starter
|
2nd Gear
Joined: Oct 2010
Posts: 68
Likes: 0
Hey guys, i just wanted to follow up and give you the link for my video. I was finally able to edit the before and after vids of the exhaust. let me know what you think. It cost me $100 for install at the body shop.

http://www.youtube.com/watch?v=Wo17L0QCniM
 
Reply
Old Mar 12, 2011 | 12:13 PM
  #27  
automan21's Avatar
automan21
5th Gear
Joined: Oct 2010
Posts: 1,053
Likes: 5
From: Bx, NY
Dude that sounds sick, I love it.
I ordered a Magnaflow muffer and just guna go straight from the cat back. Guna take it to a muffler shop and get it put on. Hopefully it will be cheaper than the full Magnaflow system.
I hope it sounds like yours.
 
Reply
Old Mar 12, 2011 | 12:19 PM
  #28  
AlbanyRocs's Avatar
AlbanyRocs
Thread Starter
|
2nd Gear
Joined: Oct 2010
Posts: 68
Likes: 0
muffler

Well if it's just a muffler, you might not get the sound you're looking for. I did that before this exhuast. I replaced just the muffler (a magnaflow one) and it didn't change much of the sound. I got this Exhaust system for about $550 (free shipping- $200 to $400 cheaper then retail) and got it put on. You should take off the resonator as well because that is what quiets down the system.

Originally Posted by automan21
Dude that sounds sick, I love it.
I ordered a Magnaflow muffer and just guna go straight from the cat back. Guna take it to a muffler shop and get it put on. Hopefully it will be cheaper than the full Magnaflow system.
I hope it sounds like yours.
 
Reply
Old Mar 12, 2011 | 12:26 PM
  #29  
automan21's Avatar
automan21
5th Gear
Joined: Oct 2010
Posts: 1,053
Likes: 5
From: Bx, NY
yeah ima remove the resonator
 
Reply
Old Mar 12, 2011 | 11:50 PM
  #30  
Achilles honor's Avatar
Achilles honor
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
Is there anything you can do to you exhaust system to quiet it down if you think it's too much drone..
 
Reply
Old Mar 13, 2011 | 06:54 AM
  #31  
AXO's Avatar
AXO
5th Gear
Joined: Oct 2010
Posts: 637
Likes: 0
From: Wellington, Florida
The Crazy part about my Drone is that it only occurs when I have the Windows up. (highway around 70mph, 3K rpms). I can eliminate the drone by backing off the gas pedal and still be able to maintain my speed.

This Mod is not for everyone, But for it is ME "****"! I get compliments everywhere I go. I am not a kid, I am in my mid 40s. I thought if I did this mod it would sound like a Kids rice Burner. On the Contrary! The Sound Deep, Mellow and most of all Agressive. It is the Best Mod I have done to date!

Just Do IT!!!!!!!
 
Reply
Old Mar 13, 2011 | 07:28 AM
  #32  
slinger688's Avatar
slinger688
6th Gear
iTrader: (2)
Joined: Aug 2008
Posts: 4,329
Likes: 13
Originally Posted by AXO
The Crazy part about my Drone is that it only occurs when I have the Windows up. (highway around 70mph, 3K rpms). I can eliminate the drone by backing off the gas pedal and still be able to maintain my speed.
I have somewhat reduced the inside drone with some judicious use of sound proofing materials under the carpet, back seats and rear trunk area. Outside, it is the same exhaust tone, inside just less drone at 3K or any engine speed.

FYI, it does takes a little time to do this.
 
Reply
Old Oct 4, 2011 | 08:29 PM
  #33  
R*C's Avatar
R*C
1st Gear
Joined: Sep 2011
Posts: 48
Likes: 0
From: Palmdale, CA
Bumping. I'm planning the MagnaFlow 16815 for my 2012 Cooper S. Does anyone have any updates on how their exhaust setup has held up over time?

Also, one thing I always wondered about modifying the exhaust... I love the pop and burble that I'm getting with my 2012. It happens frequently and is very loud. Will this be impacted by changing to the MagnaFlow? Will the pops get louder?
 
Reply
Old Oct 4, 2011 | 11:43 PM
  #34  
Achilles honor's Avatar
Achilles honor
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
Originally Posted by R*C
Bumping. I'm planning the MagnaFlow 16815 for my 2012 Cooper S. Does anyone have any updates on how their exhaust setup has held up over time?

Also, one thing I always wondered about modifying the exhaust... I love the pop and burble that I'm getting with my 2012. It happens frequently and is very loud. Will this be impacted by changing to the MagnaFlow? Will the pops get louder?
My magna is still runniing awesome and the pops are alot deeper and louder. deff a must but actually i idk about the burble anymore i havent really looked for it in awhile i wonder if i still have it
 
Reply
Old Oct 5, 2011 | 09:18 PM
  #35  
R*C's Avatar
R*C
1st Gear
Joined: Sep 2011
Posts: 48
Likes: 0
From: Palmdale, CA
Sweet. Does anyone have the hookup for a good price on this?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
Gil-galad
Eastern Iowa MINIs
63
Nov 17, 2016 02:54 PM
honderpilot
Drivetrain (Cooper S)
15
Aug 31, 2015 02:53 AM
elightbo
1st Gear
13
Aug 17, 2015 01:50 PM
rckrzy1
Drivetrain (Cooper S)
4
Aug 11, 2015 06:06 PM




All times are GMT -7. The time now is 12:04 AM.