If you can afford the 30" Apple screen you need to give us a break on prices ...lol

 

Stop being so judgmental. Wait till v2 and v3 come out.

 

maybe this is v3. M7 told me at MOTD06 they were getting a turbo motor to test with before the R56 was even released no, I didn't believe it then either

 

Actually it may be more like V3+ LOL . We had hoped to have this completed by the MIM event some time ago but kept finding subtle changes which have all been incorporated into this version. Lets just say that our mold maker is as relieved as we are . If anyone in the SO Cal area wants to see it in person and come take a ride this sunday give me a call and I will give you the details.
Randy
M7 Tuning
818 497 4341

 

Does the intake provide any HP gains that can be quantified? I am sure its difficult to show the ram air effect on a Dyno. Does the R56 really need that much air?

Thanks!

 

Our car has been tested with both stock air-filter system and also a large
K&N pleated air filter combined with the removal of the hoodscoop plate.
Underhood temps has been reported elsewhere to be fairly benign and
"not to bad", the reallity is far from that with temperature deltas reaching beyond 50ºF..... To put this in perspective, drive your car during a 90 degree day and then do the same test during a 40 degree day.

The AGS-R will always give you ambient temps no matter what and the ram effect from the air column can not be discounted as a performance enhancer either.

During testing we put the car through some harsh hot enviroments.
This includes track testing, canyon runs etc. and with that we had a very surprising problem all stemming from heat...check this out.

Melted R56 Scoop

 

well I hope I wasn't being too disruptive... I was just throwing in some humor... not to make fun but to have fun...

Peter.. I am really impressed with this design... If I had an R56... I'd take one in carbon! LOL but no filter needed thanks! I wanna hear that baby spool!

 

No offense taken Tuls.....

And thank you for the compliment. I'm running with a stripped 2 stage filter
IE. only on layer of foam..Yeehaaa

Peter
M7 Tuning
562-608-8123

 

I'd definately want to be able to hear the BOV though :/

 

LOL!

 

brought to you by the same company who brought you ingenious designs such as the PLASMA BOOSTER...

 

We distributed the Plasma Booster for a couple of years but it is now being sold by Mini Mania . It was not our design but a product from Ignition Solutions http://www.ignitionsolutions.com/
and has been successful in the BMW world for years.It was something I bought before I joined M7 and still have it on the car Nice little ignition upgrade and well worth having if only for the smoother ignition .You can find out more here with dyno plots and customer feedback:

http://new.minimania.com/web/Item/NM.../InvDetail.cfm

Thanks for the thread bump guys .

Randy
M7 Tuning

 

Anytime. Here is another bump. Re-badging FTW.

 

hey... anything i can do to help

 

moderator steping in in 5 4 3 2 ...

 

I want a plasma booster does it come in red?

 

I'm not sure of the color offerings but you could check with Mini Mania. Our version came in basic black. Now lets get back to the thread topic if we can which was about the Unichip as I recall.

Randy
M7 Tuning

 

Yes, back to the Unichip. How come a "tuning" company needs someone else to install the products they are selling? And why is it being identified as an M7 product in the original post:

 

The tune on the unichip was custom done by M7?

 

I thought the original post was fairly simple but here it is again . You aren't related to that other guy that was having a hard time with english are you ?

The first product is custom tuning software from Unichip.

Randy
M7 Tuning

 

OK thanks, UniChip did the tune thanks for answering my question.

 

Last time around they had Webb test it out - so I don't think this is too surprising.

I just looked at the original post - unless it was edited, I think it was correctly identified as a Unichip product - no?

 

As with all of our products we try to go to the best possible source whenever we can and with the preliminary results we have seen so far the Unichip is working well with the R-56. With over 55 line items not including the upcoming R-56 selections we continue to search out those manufacturers that can provide the best possible products to the market. We then work with them combining their experience with our ideas to come up with something we are proud to put our name on . Our philosophy is to use the best minds in the business to translate our thoughts into products that will be appeal to many of you. Some items have more of " their " input and some have more of " ours " but the bottom line is a good partnership where the consumer will benefit. You don't need to be a engineer yourself if you have many working for you For those of you that thought we were making everything at home on the kitchen table , sorry to dissapoint LOL . In addition to the other vendors products that we carry on our site already such as DDM and H-Sport we we will adding products from other vendors on our site to make more of a one stop shop for you all. Thanks for all the posts it's helping more than you know

Randy
M7 Tuning

 

That is a well thought out and edited statement.
But I am also trained in the arts of The Dark Side.
And I have a message for you from my master:



"These are not the mind tricks you are looking for."

P.S. I loved the reverse psychology.

 

Thanks for the compliment but if it was that well thought out I would have taken the time to spell correctly . As it was I had to go back and change two errors. I know they are tough on that in here.

Randy
M7 Tuning