Cleaning engine bay. - North American Motoring


Detailing 101 Need to find out how to pamper your new MINI? Find out all the detailing secrets here.

Cleaning engine bay.

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 08-10-2017, 09:19 PM
Scooter24 Scooter24 is offline
4th Gear
Thread Starter
 
Join Date: Aug 2016
Location: Durand, Michigan
Posts: 331
Thanks: 0
Thanked 4 Times in 4 Posts
Cleaning engine bay.

Just trying to see what everyone's opinion is on cleaning the engine bay with a power washer with low pressure? Mine is real dusty and dirty and I really want yo dial it in bit not sure if rinsing with water is a good idea?
Reply With Quote
  #2  
Old 08-11-2017, 05:32 AM
Cenla Mini Cenla Mini is offline
2nd Gear
 
Join Date: Mar 2013
Location: CENLA
Posts: 147
Thanked 1 Time in 1 Post
I ran across this a few weeks ago...step by step and really well done.

Reply With Quote
  #3  
Old 08-11-2017, 05:33 AM
r53coop r53coop is online now
Moderator
 
Join Date: Mar 2013
Location: Fuquay Varina, NC
Posts: 2,578
Thanked 192 Times in 183 Posts
I use simple green, let it soak a bit, soft brush what I can and then garden hose off. I will use a power washer on the bottom but not on the top side. I have found that gunk type cleaners put a white cast on rubber hoses, the simple green does not.
Reply With Quote
  #4  
Old 08-11-2017, 05:35 AM
r53coop r53coop is online now
Moderator
 
Join Date: Mar 2013
Location: Fuquay Varina, NC
Posts: 2,578
Thanked 192 Times in 183 Posts
I will spray a little amorall on the black vinyl/rubber parts. I think there is also a spray type silicone as well.


Reply With Quote
  #5  
Old 08-11-2017, 07:56 AM
crazy4trains crazy4trains is offline
2nd Gear
 
Join Date: May 2015
Posts: 66
Thanks: 0
Thanked 2 Times in 2 Posts
Stay away from a pressure washer. Buy some all purpose cleaner/degreaser. I use LAs APC degreaser that I buy at the local dollar store. 1 buck for a 16 ounce bottle and it works great. Saturate everything liberally with the cleaner and allow to dwell for 10-15 minutes. Works better on a warm, not hot, engine. Spray off with a gentle shower or a mist setting. Heavily soiled areas may require some agitation with a brush. Cheap paint brushes work fine. Once dry spray with your favorite dressing or just leave it as is. Once you do this the first time you can repeat every 6 months to maintain.


Try not to over-saturate electrical connections. They can tolerate getting wet but shouldn't be hit with high pressure water.


Also, I have heard that simple green is not good for uncoated aluminum and will cause pitting. I'm no chemist and I didn't stay at a Holiday Inn Express last night so do your own research and come to your own conclusions.
Reply With Quote
  #6  
Old 08-11-2017, 08:24 AM
r53coop r53coop is online now
Moderator
 
Join Date: Mar 2013
Location: Fuquay Varina, NC
Posts: 2,578
Thanked 192 Times in 183 Posts
I have the SDS for simple green. The SDS is an OSHA requried document that provides the various parts of any material used in construction and or fabrication. There is a SDS for steel rebar, a bag of cement and lumber.

There are nine products listed on the SDS, water is one of the nine, in Simple Green. Two of the products; sodium citrate (5% of solution approximate) and citric acid ( 1% of solution approximate) are food additives and both are acidic in nature. The SDS further states that Simple Green is "not expected to cause" respiratory, skin or eye irritation.

Will Simple Green cause the aluminum in your car to oxidize? Most likely but remember that aluminum oxidizes in plain old air and water. There is an old saying, "dilution is the solution". Rinse the engine off after you have used the material.

I like a clean car but I am not the type that wears leather gloves so the oil in my skin gets on the steering wheel. I am also not going to be concerned with using Simple Green on my engine.

Suum cuique.
Reply With Quote
  #7  
Old 08-11-2017, 12:50 PM
Capt_bj Capt_bj is online now
6th Gear
 
Join Date: Jul 2006
Location: Melbourne, FL
Posts: 5,944
Thanks: 0
Thanked 21 Times in 20 Posts
a word of warning ....

many times one buys Simple Green in concentrated form ... for most cleaning 1:10 dilution with water is a good starting point. 1:1 is a very strong solution. Undiluted Simple Green has been known to remove the color under the bonnet - which is 'base' not protected with clear .....

I've used low pressure steam on my engines for years. A handy tool in the garage ... cuts grease and oil with no chemicals ....

AutoRight SteamMachine Multi-Purpose Steam Cleaner

Amazon Amazon
Reply With Quote
  #8  
Old 08-11-2017, 02:47 PM
r53coop r53coop is online now
Moderator
 
Join Date: Mar 2013
Location: Fuquay Varina, NC
Posts: 2,578
Thanked 192 Times in 183 Posts
Off the course here a little but with either chrome or aluminum, Marvel Mystery oil does a great job cleaning any scale/oxidation.
Reply With Quote
  #9  
Old 08-12-2017, 06:02 PM
crazy4trains crazy4trains is offline
2nd Gear
 
Join Date: May 2015
Posts: 66
Thanks: 0
Thanked 2 Times in 2 Posts
Quote:
Originally Posted by Capt_bj View Post
a word of warning ....

many times one buys Simple Green in concentrated form ... for most cleaning 1:10 dilution with water is a good starting point. 1:1 is a very strong solution. Undiluted Simple Green has been known to remove the color under the bonnet - which is 'base' not protected with clear .....

I've used low pressure steam on my engines for years. A handy tool in the garage ... cuts grease and oil with no chemicals ....

AutoRight SteamMachine Multi-Purpose Steam Cleaner

https://www.amazon.com/AutoRight-C90.../dp/B01JYVLF0Y
Yes, concentrated Simple Green is very strong. I just put the caution out there because there are other products out there that will do a comparable job cleaning without the damage concerns in addition to being less expensive.
Reply With Quote
  #10  
Old 12-04-2017, 09:09 PM
Vmaxx! Vmaxx! is offline
1st Gear
 
Join Date: Jan 2017
Posts: 32
Thanks: 0
Thanked 1 Time in 1 Post
Yeah...

I could use one about now. A certain moderator poured DIRT all over my engine compartment!
Reply With Quote
  #11  
Old 12-05-2017, 06:08 AM
r53coop r53coop is online now
Moderator
 
Join Date: Mar 2013
Location: Fuquay Varina, NC
Posts: 2,578
Thanked 192 Times in 183 Posts
Hmm, poured or dumped? Would think that "pour" would be associated with a liquid and/or semi liquid where "dump" could be something more solid. Was this "dirt" therefore more liquid or solid?
Reply With Quote
  #12  
Old 12-05-2017, 06:46 AM
Vmaxx! Vmaxx! is offline
1st Gear
 
Join Date: Jan 2017
Posts: 32
Thanks: 0
Thanked 1 Time in 1 Post
OK, Professor!☺
Reply With Quote
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 05:54 AM.


North American Motoring is an independently operated web site supporting MINI owners and enthusiastsworldwide. As such it has no official relationship with MINI USA, BMW AG, or BMW of North America.All original artwork and design is Copyright © 2002-2004 North American Motoring. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.