Update on my R50
Update on my R50
KW V1's fitted yesterday.


Indi Blue/White roof. R50.
Mod's.
SUSPENSION
- KW V1 Coilovers
- Lenso Samurai LS2 7.0x17 (White)
- Yokohama Parada Spec II 205/40/17
- JCW front strut brace
- Omp low strut brace
- Powerflex Front Wishbone Rear Bush Set
BRAKES
- R56 brake callipers and disks
ENGINE/TRANSMISSION
- Superchips Bluefin
- Denso Iridium Plugs
- Samco hose kit
- K&N 57i induction filter
- Playmini exhaust
- Janspeed manifold/cat
- Helix Fast road clutch
- Cooper S Getrag 6 Speed box
- Fidanza lightened flywheel
EXTERIOR
- Clear rear lights
- Alta bee sting aerial
- Cooper S roof spoiler
- Cooper S side skirts
- Cooper S Bumpers
- ModnMini side cheques & number plate
- White viper stripes


Indi Blue/White roof. R50.
Mod's.
SUSPENSION
- KW V1 Coilovers
- Lenso Samurai LS2 7.0x17 (White)
- Yokohama Parada Spec II 205/40/17
- JCW front strut brace
- Omp low strut brace
- Powerflex Front Wishbone Rear Bush Set
BRAKES
- R56 brake callipers and disks
ENGINE/TRANSMISSION
- Superchips Bluefin
- Denso Iridium Plugs
- Samco hose kit
- K&N 57i induction filter
- Playmini exhaust
- Janspeed manifold/cat
- Helix Fast road clutch
- Cooper S Getrag 6 Speed box
- Fidanza lightened flywheel
EXTERIOR
- Clear rear lights
- Alta bee sting aerial
- Cooper S roof spoiler
- Cooper S side skirts
- Cooper S Bumpers
- ModnMini side cheques & number plate
- White viper stripes
Last edited by Cooperag; Feb 25, 2010 at 05:56 AM.
Trending Topics
Yes been to Brands Hatch 3 times and Silverstone. Going to brands tomorrow, will be first the time out with coilovers on.
Yeah very happy with Bluefin, not massive power increase as we all know, but revs easier and alround worth the money. I went for 6 speed as clutch needed changing and was only a matter of time before midland would go bang. Also any future power mods i now don't have to worry.






Yeah flywheel feels ok as daily drive.
Had a very busy Mini weekend. Another track day at Brands Hatch yesterday - did four 20 minute sessions. The coilovers and brakes are so good, really starting to push the mini now round the track.
Then Rolling Road day at AMD. Had two runs and best was:
140.6 bhp at 6124rpm Speed 122.6mph
127.8 lb/ft torque
Had a very busy Mini weekend. Another track day at Brands Hatch yesterday - did four 20 minute sessions. The coilovers and brakes are so good, really starting to push the mini now round the track.
Then Rolling Road day at AMD. Had two runs and best was:
140.6 bhp at 6124rpm Speed 122.6mph
127.8 lb/ft torque
Yeah flywheel feels ok as daily drive.
Had a very busy Mini weekend. Another track day at Brands Hatch yesterday - did four 20 minute sessions. The coilovers and brakes are so good, really starting to push the mini now round the track.
Then Rolling Road day at AMD. Had two runs and best was:
140.6 bhp at 6124rpm Speed 122.6mph
127.8 lb/ft torque
Had a very busy Mini weekend. Another track day at Brands Hatch yesterday - did four 20 minute sessions. The coilovers and brakes are so good, really starting to push the mini now round the track.
Then Rolling Road day at AMD. Had two runs and best was:
140.6 bhp at 6124rpm Speed 122.6mph
127.8 lb/ft torque
I went for 6 speed as clutch needed changing and was only a matter of time before midland would go bang. Also any future power mods i now don't have to worry.
Shame it's not durable, it feels really good shifting it.
Yeah, I'm in the U.S.
I've sent out an e-mail to various salvage yards. So far I've gotten 3-4 replies. I need to call back to see how much they will sell me the parts for the swap. I'm sure I can sell my midlands for atleast $800-$1,000 as it is fairly new and in great condition. Plus, I have a warranty that pays 50% of parts and 50% of labor so at the very least I might get half of the labor costs covered
Might get the swap all said and done for under $2,000.
BTW, love your MINI! Looks fantastic! I've always been a fan of the Indie Blue/White combo. Love the wheels too. If they weren't so price I'd get them myself. Got other things to buy.
I've sent out an e-mail to various salvage yards. So far I've gotten 3-4 replies. I need to call back to see how much they will sell me the parts for the swap. I'm sure I can sell my midlands for atleast $800-$1,000 as it is fairly new and in great condition. Plus, I have a warranty that pays 50% of parts and 50% of labor so at the very least I might get half of the labor costs covered
BTW, love your MINI! Looks fantastic! I've always been a fan of the Indie Blue/White combo. Love the wheels too. If they weren't so price I'd get them myself. Got other things to buy.
nice car mate!
how do you get on with running the towhook over here? with the coppers clamping down on everything i wasnt too sure how they'd react to seeing that kinda thing on the front....wanna check before i get pulled :D
how do you get on with running the towhook over here? with the coppers clamping down on everything i wasnt too sure how they'd react to seeing that kinda thing on the front....wanna check before i get pulled :D







