Fault codes
Thread Starter
|
Neutral
Joined: Dec 2019
Posts: 2
Likes: 0
From: Lexington, SC
Fault codes
I have received a Carly OBD reader for Christmas so I plugged it into my 2012 Countryman S and it found 7 fault codes. Does anyone know a way to find out what they mean?
002C57 boost pressure control, plausibility:pressure too low
00321C tankentlueftungs - and purge air fine leak: leakage pressure greater than 1.0 mm
002DD0 valvetronic system: exceeded warning threshold deviation
0028A0 throttle angle - absolute pressure suction, comparison pressure too,low
002BC0 mixture ECU: mixture too lean
00A8aD : parking light right defective. - I have replaced this bulb.
any help will be greatly appreciated.
scott Marcle
803-391-0920
smarcle@icloud.com
002C57 boost pressure control, plausibility:pressure too low
00321C tankentlueftungs - and purge air fine leak: leakage pressure greater than 1.0 mm
002DD0 valvetronic system: exceeded warning threshold deviation
0028A0 throttle angle - absolute pressure suction, comparison pressure too,low
002BC0 mixture ECU: mixture too lean
00A8aD : parking light right defective. - I have replaced this bulb.
any help will be greatly appreciated.
scott Marcle
803-391-0920
smarcle@icloud.com
1st Gear
Joined: Dec 2019
Posts: 40
Likes: 7
From: Oahu Hawaii
Is your check engine light on?
If not just clear them out and see if any come back. Often a code is stored for just a one time momentarily undesired condition and it is could be nothing to worry about.
If you get the same codes back then look into finding the solution. Just my 2 cents.
If not just clear them out and see if any come back. Often a code is stored for just a one time momentarily undesired condition and it is could be nothing to worry about.
If you get the same codes back then look into finding the solution. Just my 2 cents.
Yep, clear them and see what returns after a drive.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
Drivetrain P Fault Codes from OBD 11 Reader
scolburn79
Drivetrain (Cooper S)
17
Jan 8, 2013 04:47 PM