These used Heads are reconditioned to Performance Specs by: "Thumper Performance of Orange Park"

Both the Intake and Exhaust Bowls have gone thru extensive Bowl re-work. Opening , smoothing, blending, modifying the Valve boss to direct and increase air flow, with attention to the short radius.
Intake Ports are matched to gasket size, Ported and smoothed into the Port to the bowl. Exhaust is Ported to gasket, then opened to allow more air flow from the Supercharger, with port blending and reshaping deep into the Bowl, and then Polished.
To maintain Port Velocity, the stock valve size is retained with a Performance valve job, and a " Flow" back cut on the valve to increase low lift flow at the valve and seat, for higher velocity and faster cylinder filling. This keeps the low and increases mid-power range!! ( no flat spots here !)
The Chambers have the "hot spots" blended to prevent detonation. Head is surfaced flat to insure seal, and will allow 18- 35 HP at the wheels, depending on mods!!
$1595.00 PAYPAL OK!! Price includes: Head/ Exhaust/ Intake/ Valve cover Gaskets !! FREE* Shipping !!

*** Refundable Core Fees of $600.00 will be ADDED to the cost and Happily REFUNDED when your Good core is recieved within 30 Days!
Add'l Valve type and sizes available...

Thanks

Thumper460@hotmail.com

 

How about 222 WHP ( actual WHP) 211 SAE corrected ( 240.8 BHP) with just pulleys/ cat back/ cold air / shark ..... AND Stock Intercooler/ Stock camshaft / Stock header / stock injector !! Just bolt on My Head and be rocking!! ( Dyno sheets available)

Just me..............................

Thumper