Our first announcement thread by Turn In Concepts
Thread Starter
|
2nd Gear
Joined: Jul 2007
Posts: 60
Likes: 0
Our first announcement thread by Turn In Concepts
I am very happy to state that this is our first vendor announcement thread over here on NAM. Some of you may have seen us lurking about and offering some info in the R56 section, some of you may know us from our work on Subarus (and we know there are a few of your out there), and some of you may not even know us at all. To those folks we'd like to say HI!, and we hope that you know us soon.
Just so everyone is aware, we tend to focus more on the performance parts than appearance parts. The parts we make or carry are all proven to be of high quality, proven performance, and typically tested by us so there's no surprises.
Anyway, at first glance you'll see we don't have a lot on the site yet, but we will have more things coming soon. Goodies from folks such as M7, Kartboy, AST, Swift, Superpro and of course our own line of good stuff.
Now, before I tell you all about what we have stock so far let me give one piece of information. I think this one is kind of important, so folks should know it right up front. Shipping in the US is free.
So, here's what we have in stock:
New Mach V Technic R56 lowering springs - $199 shipped in the US
These are progressive rate, and have a drop of about 1.25"
Here's the direct link to them on our site:
http://turninconcepts10.chainreactio...roducts_id=465
Here's a small pic:
Whiteline 20mm adjustable rear anti-roll bar - $175 shipped in the US
This is a solid bar featuring three points of adjustment. Adjustments are equivilant to 18mm, 20mm, and 22mm. Originally designed for the R50/R53 we have found that it also fits the R56 quite nicely.
Here's the direct link to them on our site:
http://turninconcepts10.chainreactio...roducts_id=440
Here's a small pic:
Whiteline 26mm adjustable front anti-roll bar - $200 shipped in the US
This is also a solid bar that features 2 points of adjustment. Adjustments are equivilant to 26mm and 28mm. Due to the adjustable nature of this bar it also comes with new endlinks. It is designated for the R50 and R53, and LOOKS like it might work for the R56 (but we haven't had a chance to try it yet).
Here's the link to them on our site:
http://turninconcepts10.chainreactio...roducts_id=441
Here's the small pic:
Anyway, that's all to get us started, but we do have some stuff on the way from M7. When that lands I'll let folks know.
In the mean time, if you have any questions please don't hesitate to ask.
Just so everyone is aware, we tend to focus more on the performance parts than appearance parts. The parts we make or carry are all proven to be of high quality, proven performance, and typically tested by us so there's no surprises.
Anyway, at first glance you'll see we don't have a lot on the site yet, but we will have more things coming soon. Goodies from folks such as M7, Kartboy, AST, Swift, Superpro and of course our own line of good stuff.
Now, before I tell you all about what we have stock so far let me give one piece of information. I think this one is kind of important, so folks should know it right up front. Shipping in the US is free.
So, here's what we have in stock:
New Mach V Technic R56 lowering springs - $199 shipped in the US
These are progressive rate, and have a drop of about 1.25"
Here's the direct link to them on our site:
http://turninconcepts10.chainreactio...roducts_id=465
Here's a small pic:
Whiteline 20mm adjustable rear anti-roll bar - $175 shipped in the US
This is a solid bar featuring three points of adjustment. Adjustments are equivilant to 18mm, 20mm, and 22mm. Originally designed for the R50/R53 we have found that it also fits the R56 quite nicely.
Here's the direct link to them on our site:
http://turninconcepts10.chainreactio...roducts_id=440
Here's a small pic:
Whiteline 26mm adjustable front anti-roll bar - $200 shipped in the US
This is also a solid bar that features 2 points of adjustment. Adjustments are equivilant to 26mm and 28mm. Due to the adjustable nature of this bar it also comes with new endlinks. It is designated for the R50 and R53, and LOOKS like it might work for the R56 (but we haven't had a chance to try it yet).
Here's the link to them on our site:
http://turninconcepts10.chainreactio...roducts_id=441
Here's the small pic:
Anyway, that's all to get us started, but we do have some stuff on the way from M7. When that lands I'll let folks know.
In the mean time, if you have any questions please don't hesitate to ask.
Thread
Thread Starter
Forum
Replies
Last Post
squawSkiBum
Tires, Wheels, & Brakes
27
Nov 19, 2024 10:26 AM
bctf1
F55/F56 :: Hatch Talk (2014+)
9
Aug 6, 2015 12:55 PM