Hey joker, this only good pic I have of them. Hope this help.

 

the wheels are 2pc and weigh about 22lbs a piece.

 

looks like U have alot of room to drop it further....how close 2 ur' fenders are U', (on the edge) 18's on a mini cooper R' right at home!!
R' they easy 2clean?

 

The EVO wheel looks nice but man the aren't easy to clean.

 

not bad at all pretty standard when it comes to 2 or 3-pc wheels in weight. is that D' graphite finish? what R' U' getting next or if U dont want 2say it's kool. these R' custom- so no need 4hub rings right? i'll call U' about ur' other kit 4sell just whant 2make sure it's all good 4what i'm doin'

 

............just make sure U' dont ever use chemicals on them...just wax or vaseline will do.

 

This is my P-chop of my car, probably the setup I'm gonna run next spring. They're only 17", but 7.5" front, 9" rear.

If you're familiar with these wheels, which are borbet type A's, I'm gonna go with flat caps instead of the ones in the picture.

 

Here's another pic of the wheels with flat caps. I came from the VW/Audi scene, so it's hard to get away from the euro style. not alot of people will like these wheels on a MINI, but to each their own

 

Now that is a deep lips on this wheels............

 

Hey 02///MCS, I'm running Axis Mesh 2 19x8 with an Eibach Pro Kit drop (1" Front, 1.2" Rear) I get full steering lock and no rub what so ever. These Wheels have a 47 offset and they fit like a glove.
Now these pics are not lowered yet, I just haven't had a chance to take more photos recently.

 

The wheels are not the se7en mods. They are the Supermesh, they are not listed on the Axis website any more because they were replaced with the Axis Penta. I'd get the Penta but the smallest size they come in is 19". Which for my taste is a bit much as I don't want to sacrifice too much performance. If someone could photoshop the Supermesh onto an MCS I would greatly appreciate it. Thanks.

These are the Axis Supermesh:


These are the Axis Supermesh on an Audi A4:


These are the Axis Supermesh on a 330Ci Performance Package (ACS Lip):


These are the Axis Penta:

 

if I had the dough and the will I would get these Breyton MINI Sports ... in 18' on a lowered car ... these are hot!

 

I would love to have those on mine, looks awesome, pricy though

 

D' flat caps dont take away from them.
how close 2' rear fenders R' U'?
look's killer,

 

hmm...i was wonderin' why i did not see them anymore (se7en mod's) but that mesh wheel look's better.......