Team Dynamics Pro Race 1.2 17x8 offset - HELP!!!
#1
Team Dynamics Pro Race 1.2 17x8 offset - HELP!!!
Hello!
What would be best et33 or et38? Looking to be flushed with the fenders. A little poke is okay; however, I will be dropping very soon. This is for a R53.
I have searched around and can only find 2 MINI's with the same wheel running a 17x8. They both are running et38 with wider tires. I plan to use my current tires which are Conti DWS 205/45/17 for a while and then probably go with 215/40/17.
So what is your vote? Ordering these wheels next week. I have even toyed the idea of buying et38 and some 5mm spacers to see how it looks; however, I have never liked spacers.
What would be best et33 or et38? Looking to be flushed with the fenders. A little poke is okay; however, I will be dropping very soon. This is for a R53.
I have searched around and can only find 2 MINI's with the same wheel running a 17x8. They both are running et38 with wider tires. I plan to use my current tires which are Conti DWS 205/45/17 for a while and then probably go with 215/40/17.
So what is your vote? Ordering these wheels next week. I have even toyed the idea of buying et38 and some 5mm spacers to see how it looks; however, I have never liked spacers.
#3
#7
3rd Gear
iTrader: (4)
Join Date: Jun 2011
Location: Tempe, AZ
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#13
Creeve - Will you post some pics? I can wait another week or so to order. I am excited to see your ride. I recall you had Rotiforms and seriously considered those wheels. Your car looked hot! So what wheels are you getting?
#14
#16
Well the wheel is gonna look the same either way, they just change the thickness of the mounting pad. They don't change the concavity of the face or deepen the lip with these wheels for different offsets ,so you might as well get the et38 and if you want a "flusher" look just throw some 5mm or 8mm spacers on
#20
#21
$50 and 45 min later the exhaust is in! much deeper than the one ball for sure. it is a little loud on the highway for my taste right now. i am hoping after a few hundred miles it should quite down. all my other exhausts have done that.
is it worth the money over the one ball? yes! much much deeper. the pops and burble are still there but much deeper. i like! got rid of the raspy and tingy sounds that i did not care for. unless its a e46 m3 i do not care for rasp. need to do something about those tips...
wheel update: should be in next week!
is it worth the money over the one ball? yes! much much deeper. the pops and burble are still there but much deeper. i like! got rid of the raspy and tingy sounds that i did not care for. unless its a e46 m3 i do not care for rasp. need to do something about those tips...
wheel update: should be in next week!
#22
hi every one woundering the same i wana stance mine i have a.2005 chili red five speed with the cravenspeed shift well cover i just installed today im either debating on either stance coilovers or bc coilovers then eneki nto3 but dont know what offset i should do. im proully gonna run 17x7 or 7.5 any ideas to get that poke
#23
i hear 17x8 et 35 is gold. so go 17x7.5. wait... they make nt03 for mini? my favorite enkei wheel is the rpf1 but have to be 9" for the flat spokes.
coilovers: i am going with st for around 1k. they seem to be the best compromise between cost and quality. only height adjustable though. do not know if that matters to you or not.
coilovers: i am going with st for around 1k. they seem to be the best compromise between cost and quality. only height adjustable though. do not know if that matters to you or not.
#25