Hello All...
What length bolts will I need if I were to put 10mm and 5mm 56.1 hubcentric spacers on my mini. What size are the stock ones? This is for an 09 R56.

Thanks in advance.
Paul

 

I believe the stock bolts have a 28mm threaded shank. If you are going to put 10mm spacers then you would need 38mm threaded shanks. The late R53's and all R56's have a 14mm X 1.25 thread so you would need new bolts with this thread diameter and pitch w/cone seats and 38mm threaded shanks. See the following site, which is where I got the bolts for my 16mm spacers. http://www.radusadirect.com/product/...-17mm-Hex.html