I want to replace the solid rotors on my 09 JCW R56 with drilled/slotted rotors front AND rear. Not looking to replace the calipers etc. Suggestions?

Thanks

 

Why?

 

Purely cosmetic. I like the way they look

 

If you are going to be doing any type of track days you have a good chance of acquiring surface cracks with the drilled type. If that is not a concern you can look into products by DBA, Disc Brakes Australia . Also Todd ,from TCE a vendor on here, is a wealth of info.

 

Thanks. Little to no track time. The most braking I will be doing is avoiding pedestrians in the parking lot of Whole Foods....

 

There is a front rotor that MINI lists for the JCW Brake kit that is drilled and slotted. Part # 34-11-6-784-371, but that is front only. The rotor size is 316mm.

See http://www.realoem.com/bmw/showparts...88&hg=34&fg=95 at RealOEM.

 

Thanks Gnatster - I'll probably go that route, even though I would love to have matching rear drilled rotors.