Suspension Ireland Engineering Suspension Products...
Ireland Engineering Suspension Products...
I know there has been a lot of information about these guys and there caster camber plates and sway bars, but could some of the guys who have them chime in again and let us poor people know how they are working out?
I recently installed the Ireland adjustable camber plates (street version). They work great! Easy to adjust and well worth the $$. I have had their rear bar (22mm hollow) and it was a bit of a chore to get it working correctly. I had to make stops so it would not move side to side (simple with large washers and hose clamps). It too works great and is easy to adjust. I also have their rear lower arms. They were easy to install as well.
Good Luck
Mike
Good Luck
Mike
Joined: Feb 2003
Posts: 1,754
Likes: 36
From: Metro Detroit Area, Michigan
adjustable front street/track camber plates: i have a set on my car as well as installed a few sets for customers. a good camber plate for the money, nice ride, camber adjustments as needed, and it doesn't raise the car. the down side is the directions do suck (if you even get them), and they are hard to get. they have been out of stock for a while and they keep telling me they will ship next week. that was two months ago
. but for the price, i would go with them.
i carry the whole Ireland line and could do the leg work for you if needed. give me a call. chad
. but for the price, i would go with them.
__________________
agocart,
It looks like the current street/track plates that I just recieved can be assembled to cause a small fixed caster change as well as adjustable camber. Am I looking at this right? if so, have you installed any to change the caster?
It looks like the current street/track plates that I just recieved can be assembled to cause a small fixed caster change as well as adjustable camber. Am I looking at this right? if so, have you installed any to change the caster?
Joined: Feb 2003
Posts: 1,754
Likes: 36
From: Metro Detroit Area, Michigan
yes, it is true you can change caster some with these plates, but no i have not done any cars like that yet. i am sure when i do it will be my car, but so far i have not out driven the car yet. when i do I'll let everyone know...lol, but start off with one change and see how you like it before you jump into another change. that way you can actually feel which item helped or didn't help. also everyone should visit this Thread. there are lots of good photo's of this item along with what has to be done to mount then to get the camber you want. it is the item that is not in any directions.
__________________
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
silence2-38554
R50/R53 :: Hatch Talk (2002-2006)
3
Nov 12, 2015 09:39 AM
PelicanParts.com
Vendor Announcements
0
Aug 4, 2015 02:45 PM








