Hi,

I am making some adjustable rear camber / toe arms and want some dimensions:

Length of the metal bush the mounting bolt goes through to attach the arm to the car. I am guessing it is around 50mm / 2" because RealOEM says it is an M12x65 bolt holding them on.

If someone has aftermarket adjustable arms whether the heim joints / rose joints / rod ends are 16mm (5/8") or 20mm (3/4") thread.

Thanks!

James

 

trying to understand what your asking haha, fortunately I have some adjustable ones sitting outside of the car right now. you want to know the bolt length and the thread at the joint?

 

Not sure how helpful this DIY is, but it might provide some good info in it. Probably getting your hands on a set yourself to take dimensions is a good idea.

-Luccia