Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

OBD Connector Location

Old Jul 8, 2006 | 10:39 AM
  #1  
emcguy's Avatar
emcguy
Thread Starter
|
1st Gear
Joined: Mar 2006
Posts: 13
Likes: 0
OBD Connector Location

Can anyone tell me where the OBD connector is on the 05 MC?

Thanks!
 
Reply
Old Jul 8, 2006 | 10:49 AM
  #2  
kenchan's Avatar
kenchan
6th Gear
iTrader: (3)
Joined: Sep 2003
Posts: 31,439
Likes: 4
if it's in the same location as the 03 MCS, it's on the left side under
the dash. there should be a little cap that you pull down.
 
Reply
Old Jul 8, 2006 | 11:52 AM
  #3  
Dr Obnxs's Avatar
Dr Obnxs
Former Vendor
iTrader: (7)
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
All cars have to have it pretty close to the steering wheel.

so no matter the model, if you look around the driver's side, you will usually find it......

Matt
 
Reply
Old Jul 8, 2006 | 06:52 PM
  #4  
caminifan's Avatar
caminifan
6th Gear
Joined: Jul 2004
Posts: 2,072
Likes: 4
It is almost directly opposite from the bonnet release (on the left side of the car) - with a dark grey (anthracite?) cover.
 
Reply
Old Jul 8, 2006 | 07:03 PM
  #5  
Motor On's Avatar
Motor On
6th Gear
iTrader: (1)
Joined: Oct 2005
Posts: 20,848
Likes: 15
My three thousand words on the subject.

See note at bottom of page

Black area just to left of center is cover for the port

Its right where the cover is hanging down.

Hope this helps.

I know; I was at a construction site yesterday won't have a chance to vaccum until tomorrow, please spare the flaming about the dirty floormats.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Filmy
Navigation & Audio
15
Jun 6, 2023 06:27 AM
CRC
R50/R53 :: Hatch Talk (2002-2006)
2
Dec 26, 2015 11:30 AM
Mini Mania
Interior/Exterior Products
1
Oct 19, 2015 08:07 PM
RocketUSA
R50/R53 :: Hatch Talk (2002-2006)
5
Sep 15, 2015 07:45 AM
old81
MINI5280
0
Sep 3, 2015 09:03 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:20 PM.