I was wondering if the TMAP & MAF sensors were interchangeable, for T-Shooting purposes.
PN's are
12140872648
12140872679
If anyone can answer this please mail me
petepees@bellsouth.net

 

No, they are not.....the sensors will mount in either spot....but they are different sensors.....also, the Map sensor has 4 terminals inside, the T-MAP sensor only has 3

Bryan

 

Thanks for the input. I am struggling with the dreaded P2096 once again and thought I was gonna have to replace one of those sensors.

I took them both out and cleaned them, had a new O2 sensor installed in the rear position and checked as best I could for vacuum leaks.

From what I can see, this code should clear but it is not. I have reset it several times, let the car run thru the emission checks and everything is good, why won't this code clear??

it comes on immediately when i start the car too, I would think that it would need to run a while before it could code out again.Any ideas??

 

just curious, how & what are you using to try and clear the code with??

Bryan

 

BlueDriver & Torque

 

A lot of aftermarket scanners, code readers, and Bluetooth devices will not clear codes on European vehicles. I have a Snap On scanner which is updated to the latest software version, I couldn't get it to clear codes on my '04 R53.... I ended up getting a Schwaben scanner from ECS tuning..... that one works

Bryan