Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Hood/Hatch warning light stays on

Thread Tools
 
Search this Thread
 
Old Oct 21, 2017 | 09:18 AM
  #1  
Rgallic's Avatar
Rgallic
Thread Starter
|
1st Gear
Joined: Nov 2016
Posts: 13
Likes: 0
Hood/Hatch warning light stays on

2005 Mini Cooper S
Hood/Hatch warning light stays on.
I'm trying to sort out which end may be at fault.
If the hatch switch were failing would the interior light stay on?
Where is the switch for the hatch?
 
Reply
Old Oct 21, 2017 | 03:00 PM
  #2  
Whine not Walnuts's Avatar
Whine not Walnuts
OVERDRIVE
Joined: Mar 2013
Posts: 5,489
Likes: 629
From: Fuquay Varina, NC
Going to move you to the Stock Problems/Issues area.

In the FAQ section, the first thread will include a section on how to look up parts. Item 0014 has a link to Realoem that has templates on all the different portions of the car.
 
Reply
Old Oct 21, 2017 | 08:06 PM
  #3  
Rgallic's Avatar
Rgallic
Thread Starter
|
1st Gear
Joined: Nov 2016
Posts: 13
Likes: 0
Figured out the problem, thought I'd share should anyone else run into this.
Turned out to be the hood sensor switch, appears to be shorted.
I unplugged the cable, light went off.
Needs a new switch.
 
Reply
Old Oct 22, 2017 | 04:40 AM
  #4  
Whine not Walnuts's Avatar
Whine not Walnuts
OVERDRIVE
Joined: Mar 2013
Posts: 5,489
Likes: 629
From: Fuquay Varina, NC
Good to know, switch is on the passenger side latch?
 
Reply
Old Oct 22, 2017 | 05:16 AM
  #5  
CSP's Avatar
CSP
5th Gear
Joined: Feb 2017
Posts: 648
Likes: 38
From: Chicago
Easy troubleshooting! Thanks for following up on the thread. Enjoy being warning light free!
 
Reply
Old Oct 22, 2017 | 05:44 PM
  #6  
Rgallic's Avatar
Rgallic
Thread Starter
|
1st Gear
Joined: Nov 2016
Posts: 13
Likes: 0
Originally Posted by r53coop
Good to know, switch is on the passenger side latch?
Yes, I took it out, checked it with an ohm meter. Odd, I expected the switch to fail open. This one appears to be stuck closed, little change when I press the plunger. For now I'm just leaving it unplugged.
 
Reply




All times are GMT -7. The time now is 04:31 PM.