Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

lose of power

Thread Tools
 
Search this Thread
 
Old Dec 4, 2016 | 03:45 PM
  #1  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
lose of power

The other night i filled up on gas. 93 octane. SES came on and started sputtering. No power driving home. Took fuel cap off then put back on sputtering stop but SES was still on. still low on power and cooling fan doesnt turn on. slight smell of fuel and burnt rubber. Any suggestions?
 

Last edited by froggy_07; Dec 4, 2016 at 04:11 PM.
Reply
Old Dec 4, 2016 | 03:49 PM
  #2  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
having a problem..it will not show the whole message. ok I shortened it now it shows.
 

Last edited by froggy_07; Dec 4, 2016 at 04:08 PM.
Reply
Old Dec 4, 2016 | 05:09 PM
  #3  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
2007 Mini Cooper S
supercharged
~122k
 
Reply
Old Dec 4, 2016 | 05:10 PM
  #4  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
.
 
Reply
Old Dec 4, 2016 | 05:11 PM
  #5  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
I drove home (
 
Reply
Old Dec 7, 2016 | 07:17 AM
  #6  
ECSTuning's Avatar
ECSTuning
Platinum Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2013
Posts: 36,758
Likes: 2,548
From: Wadsworth, Ohio
Read it with a good scan tool first otherwise its a shot in the dark.

https://www.northamericanmotoring.co...d-q-and-a.html
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Reply
Old Dec 7, 2016 | 11:51 AM
  #7  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
was a misfire on cylinder #1.
 
Reply
Old Dec 7, 2016 | 11:52 AM
  #8  
ECSTuning's Avatar
ECSTuning
Platinum Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2013
Posts: 36,758
Likes: 2,548
From: Wadsworth, Ohio
Coil Pack connection wire most of the time when its just one cylinder, then check the plug itself. Then Change out the coil pack.
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Reply
Old Dec 7, 2016 | 11:55 AM
  #9  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
i had plugs and wires done within 6 months ago. Maybe a fuel injector is dirty?
 
Reply
Old Dec 7, 2016 | 12:01 PM
  #10  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
sorry about that i sent that message before I saw yours show up
 
Reply
Old Dec 8, 2016 | 02:09 PM
  #11  
nkfry's Avatar
nkfry
Vendor - Detroit Tuned 15 Years
Joined: Jul 2014
Posts: 1,859
Likes: 34
From: Clawson, MI
Check the torque on the plugs, make sure there isn't gobs of anti seize or dielectric on everything.

If it started right after fueling up I would caution a guess to the quality of fuel. Are you sure you didn't fill up with E85?
 
__________________
https://www.northamericanmotoring.com/forums/signaturepics/sigpic151635_2.gif
MINI Specialists * Parts * Performance * Service
Phone:586-792-6464
Info@DetroitTuned.com
Nick@DetroitTuned.com
Reply
Old Dec 9, 2016 | 07:06 AM
  #12  
ECSTuning's Avatar
ECSTuning
Platinum Sponsor
10 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2013
Posts: 36,758
Likes: 2,548
From: Wadsworth, Ohio
Originally Posted by froggy_07
sorry about that i sent that message before I saw yours show up
No problem. Did you ever scan it? Also make sure the wire and plugs are tight and snapped in all the way, as well as the spark plugs. They can work themselves out. Also with a good scan it would tell you if the injector is firing. A quick way to check that is to unplug that wire harness plug to it.
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Reply
Old Dec 9, 2016 | 07:03 PM
  #13  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
I always use E92.
 
Reply
Old Dec 9, 2016 | 07:05 PM
  #14  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
ECS I did have it scanned, misfire cylinder #1.

What happens when evap leak occurs? (fuel cap not sealed) SES light comes on.
 
Reply
Old Dec 9, 2016 | 07:08 PM
  #15  
froggy_07's Avatar
froggy_07
Thread Starter
|
2nd Gear
Joined: Aug 2016
Posts: 69
Likes: 0
From: Pennsburg, PA
Ill check the wires tomorrow and see what I can find.
 
Reply




All times are GMT -7. The time now is 02:27 PM.