Rear interior panel removal

Reply Subscribe

Thread Tools

Search this Thread

Nov 24, 2014 | 05:54 PM

ArmyDog

Thread Starter

Coordinator::Asia

Joined: Oct 2002

Posts: 845

Likes: 2

Rear interior panel removal

Does anyone have good detailed instructions for the removal of the rear interior panels? I am attempting to replace my Harmon Kardon amp and sure could use some assistance. The instructions I found on NAM are for the R56 and are not that helpful. Thanks in advance!!!!

Nov 25, 2014 | 07:57 AM

ECSTuning

Platinum Sponsor

Joined: Jan 2013

Posts: 36,744

Likes: 2,541

From: Wadsworth, Ohio

Removal:

https://www.northamericanmotoring.co...failure-3.html

Here is the diagram:

For the direct replacement of the R50 R53 amp. This is the new amp.

Harman Kardon Amplifier 65129146708

http://www.ecstuning.com/Search/SiteSearch/65129146708/

The R52 Convertible has a different one.

__________________

Nov 25, 2014 | 02:46 PM

ArmyDog

Thread Starter

Coordinator::Asia

Joined: Oct 2002

Posts: 845

Likes: 2

Thanks for the diagram! However I am still trying to find instructions for the removal of the panel.

Nov 25, 2014 | 06:37 PM

ArmyDog

Thread Starter

Coordinator::Asia

Joined: Oct 2002

Posts: 845

Likes: 2

I got the amp replaced and it is working! I started by pulling the door seal then slowly worked my way back to the amp. It took me about 2 hours to complete. Now I have to finish the passenger side Schroth harness for the wifey and reinstall my M7 rear chassis brace and rear seat delete.

Quote:

Originally Posted by ECSTuning

Removal:

https://www.northamericanmotoring.co...failure-3.html

Here is the diagram:

For the direct replacement of the R50 R53 amp. This is the new amp.

Harman Kardon Amplifier 65129146708

http://www.ecstuning.com/Search/SiteSearch/65129146708/

The R52 Convertible has a different one.