Mini Not Starting Replaced Started
#1
Mini Not Starting Replaced Started
Afternoon Gentlemen!
A little background information:
So approx 3 week ago I was sitting idling and shut my mini off to go for a walk at park near my job. I came back attempted to start the car and nothing, not clicking sound, but I had power but no way of knowing if I was getting enough volts to get the starter to work so:
I called AAA and got a jump, but no luck, car still didn't start!
Off the to dealership it got towed.
So after a day of the shop looking at it, they told me it was a faulty starter. The cost to replace the starter, $687 US. :( :(
So I'm no expert but decently knowledgeable with cars, so I read on the forums and decided to replace my own starter.
Off to Autozone, purchased a new starter cost 120 sans core.
I finished today replacing the starter, which btw with a few extension rods is easy to from the right wheel well.
Anywho...... So put everything back, all good, exhaust manifold, heat shield and new starter in place.
Well I go to start the car, and same thing nothing, no clicking nada! :( :(
I'm perplexed.... so I decided to check then voltage on the battery terminals looks like its over 12volts, so not terrible but not awesome.
Ok that wasn't the problem I thought, so I decided to check the fuses, nothing wrong there.
Is there something I'm not thinking of before I bring this to a mechanic?
Looking for some guidance.
many thanks in advance guys.
Sincerely,
MiniGigi
A little background information:
So approx 3 week ago I was sitting idling and shut my mini off to go for a walk at park near my job. I came back attempted to start the car and nothing, not clicking sound, but I had power but no way of knowing if I was getting enough volts to get the starter to work so:
I called AAA and got a jump, but no luck, car still didn't start!
Off the to dealership it got towed.
So after a day of the shop looking at it, they told me it was a faulty starter. The cost to replace the starter, $687 US. :( :(
So I'm no expert but decently knowledgeable with cars, so I read on the forums and decided to replace my own starter.
Off to Autozone, purchased a new starter cost 120 sans core.
I finished today replacing the starter, which btw with a few extension rods is easy to from the right wheel well.
Anywho...... So put everything back, all good, exhaust manifold, heat shield and new starter in place.
Well I go to start the car, and same thing nothing, no clicking nada! :( :(
I'm perplexed.... so I decided to check then voltage on the battery terminals looks like its over 12volts, so not terrible but not awesome.
Ok that wasn't the problem I thought, so I decided to check the fuses, nothing wrong there.
Is there something I'm not thinking of before I bring this to a mechanic?
Looking for some guidance.
many thanks in advance guys.
Sincerely,
MiniGigi
Thread
Thread Starter
Forum
Replies
Last Post
09R56
R56 :: Hatch Talk (2007+)
17
11-16-2022 10:49 AM
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM