Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

Trouble pin pointing issue

Thread Tools
 
Search this Thread
 
  #1  
Old 09-15-2020, 10:08 PM
thecleanserman's Avatar
thecleanserman
thecleanserman is offline
1st Gear
Thread Starter
Join Date: Sep 2020
Location: Louisiana
Posts: 15
Likes: 0
Received 2 Likes on 2 Posts
Trouble pin pointing issue

I recently purchased a 1 owner 2009 R56 with 127K miles. Documented maintenance history and oil changed every 5k miles. I turned on the car over the weekend to clean some stuff and noticed almost a valve clatter type noise with a shake that is almost a bad engine mount. I do not remember hearing the noise before. I know the plastic tensioners tend to break on these units. I knew that was going to need to be changed sometime. Checked forum and since I did not have anyone available to rev the motor I could not test to hear if the noise would get worse or change. Car had been running only for 5 mins. Oil level was almost at the max fill mark. No CEL either.
I checked many websites for videos and symptoms from Death Rattle, bent exhaust valves, vacuum pump noise. Closest sounding thing was possibly death rattle but since I could not have someone rev the motor to confirm the rattle I am only able to go by idle. Either my hearing is crap or my brain is fried from work to narrow down the issue. Attached are the idle video of the noise. I kind of do not want to crank it up to test again if something is already going south.

https://streamable.com/nby4n6

https://streamable.com/qcrpsg
 
  #2  
Old 09-16-2020, 03:15 AM
njaremka's Avatar
njaremka
njaremka is online now
Alliance Member
Join Date: Jul 2016
Location: WNY
Posts: 6,124
Received 1,718 Likes on 1,384 Posts
I can’t tell from those videos if anything is wrong or not. Sounds like every other N14 video I’ve seen.

At 127k miles, if the timing chain hasn’t been replaced recently, its time. I would replace the timing kit, and go from there.
 
  #3  
Old 09-16-2020, 06:15 PM
thefarside's Avatar
thefarside
thefarside is offline
4th Gear
Join Date: Mar 2014
Location: Harvard, MA
Posts: 364
Received 63 Likes on 53 Posts
Sounds fine to me, however I think I hear a slight knocking, most likely from a tired vacuum pump. An 11 year old mini will need new motor mounts, new plastic cooling bits. Thermostat housing on the N14 seem to not last very long.

I hope you got it for almost free, as parts are going to add up quick...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jas31483
F55/F56/F57 Stock Problems/Issues
3
05-18-2019 04:09 PM
amusingdream
Stock Problems/Issues
32
03-12-2019 07:03 AM
Minime1963
R55 :: Clubman Talk (2008+)
11
11-09-2015 07:33 AM
rsprans
General MINI Talk
5
06-16-2013 07:55 PM
Aevum
Stock Problems/Issues
4
04-23-2012 08:42 AM



Quick Reply: Trouble pin pointing issue



All times are GMT -7. The time now is 04:45 PM.