Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

R53 drive shafts - HELP

Thread Tools
 
Search this Thread
 
Old Oct 4, 2010 | 11:38 AM
  #1  
MCSjulz's Avatar
MCSjulz
Thread Starter
|
Neutral
Joined: Jun 2010
Posts: 8
Likes: 0
R53 drive shafts - HELP

Hi guys,

In need of new drive shafts so just wanted to ask, is there a difference between the drive shafts in an early 05 R53 and a late 05 R53 (both manual)?

Reason I ask is from my understanding, the gearbox is different in the later R53s (Hollinger I believe).

Also, in your experience would it be worth while picking up a pair from the wrecker? (provided the CVs are in good shape of course) or am I better off getting new ones?

thanks in advance

-Julz
 

Last edited by MCSjulz; Oct 4, 2010 at 11:46 AM.
Reply
Old Oct 4, 2010 | 12:09 PM
  #2  
quikmni's Avatar
quikmni
6th Gear
Joined: May 2004
Posts: 2,486
Likes: 7
From: Orcutt, CA
The part numbers appear to be the same for all R53 years so I suspect no difference. RealOEM shows the whole driveshaft with CV joints as a remanufactured part.
Right P/N: 31607574850 $580
Left P/N: 31607574852 $506
 
Reply
Old Oct 4, 2010 | 12:29 PM
  #3  
chilimac's Avatar
chilimac
4th Gear
iTrader: (3)
Joined: Jul 2005
Posts: 486
Likes: 0
From: Denver, CO
try Way at Waymotorsports for a much better price. Also refrain from buying the Chinese axles that sell for $100 per side. They are horrible and WILL fail, sometimes in three months.
 
Reply
Old Oct 4, 2010 | 02:46 PM
  #4  
quikmni's Avatar
quikmni
6th Gear
Joined: May 2004
Posts: 2,486
Likes: 7
From: Orcutt, CA
I just looked a Mini Mania and they show two different drive shafts depending on the year up to 07/2004 and then after 07/2004. Here is the link.
http://new.minimania.com/web/item/NMD7638/InvDetail.cfm
Still very expensive.
You can also check penskeparts.com and pelicanparts.com.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Melvinyip
Stock Problems/Issues
4
Apr 17, 2020 09:28 AM
Emnotek
Vendor Announcements
0
Aug 13, 2015 05:47 PM
ECSTuning
Interior/Exterior Products
2
Aug 7, 2015 09:51 AM
ECSTuning
Vendor Classifieds
0
Aug 7, 2015 08:10 AM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM




All times are GMT -7. The time now is 01:31 AM.