Driving home tonight noticed that my head lights were pointing down and would not self-level. Got home to see that my level sensor arm broke. Can you just replace the arm ON the sensor or do you have to replace the entire sensor? I am thinking the entire sensor must be replaced :(

http://www.allminiparts.com/showAsse...sembly=z_v_228

 

If it's just the dogbone you can. Otherwise you'll have to get the whole sensor. I think I have some used ones here to save you some money if you need one.

WAY

 

Ya it is the arm that is attached to the sensor itself. Just "jerry" rigged it w/ a couple drilled holes and some bailing wire for now. Works like a jiffy for now