Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

changed oil now engine light comes on

Old Oct 3, 2008 | 04:32 PM
  #1  
craigfsl's Avatar
craigfsl
Thread Starter
|
2nd Gear
Joined: May 2008
Posts: 95
Likes: 0
changed oil now engine light comes on

changed the oil in my 02 cooper s 2 days ago and now the engine light comes.
went and reset the mileage according to the post to do it.

but here is the thing it comes on in the morning on the way to work, first the traction control light comes on then the engine light a few miles later.

the engine light ends up being the cam sensor.

I get to work clear the code(I manage a auto store) and it is fine until the next morning.

I cant tell what it is if the code is a real code, it should come back when i start it up again and drive home.

I have now un-hooked the battery and turned the key on so maybe that will solve it.

any other help is appreciated
 
Reply
Old Oct 3, 2008 | 04:52 PM
  #2  
joey1320's Avatar
joey1320
4th Gear
Joined: Aug 2006
Posts: 515
Likes: 1
From: Ohio
i have replaced a handfull of bad cam sensors, and yours being an '02 sounds like its on its way out... sorry!!!
 
Reply
Old Oct 3, 2008 | 06:00 PM
  #3  
craigfsl's Avatar
craigfsl
Thread Starter
|
2nd Gear
Joined: May 2008
Posts: 95
Likes: 0
seems kinda weird though it only comes on in the morning and after I changed the oil
 
Reply
Old Oct 4, 2008 | 04:06 AM
  #4  
joey1320's Avatar
joey1320
4th Gear
Joined: Aug 2006
Posts: 515
Likes: 1
From: Ohio
Originally Posted by craigfsl
seems kinda weird though it only comes on in the morning and after I changed the oil

just a couple of questions...

how much oil did you put back in the engine?
what viscosity oil did you use?
is there only one fault in the dme?
does the car run ok besides the light?
 
Reply
Old Oct 4, 2008 | 12:53 PM
  #5  
craigfsl's Avatar
craigfsl
Thread Starter
|
2nd Gear
Joined: May 2008
Posts: 95
Likes: 0
put 5-30 mobile 1 in it(was told that was in it origionaly)
put 5 quarts in then ran it to cycle the system than topped off to the full on the stick.
only the one code(didnt come on today but the asc still turned off, turned car off then back on and works fine)
yeah runs fine no hesitation, miss, or any other sign drives like it did before.
 
Reply
Old Oct 4, 2008 | 07:04 PM
  #6  
Rich.Wolfson's Avatar
Rich.Wolfson
6th Gear
iTrader: (1)
Joined: Dec 2002
Posts: 1,266
Likes: 3
From: Northern New Jersey
Originally Posted by craigfsl
...5-30 mobile 1 ...put 5 quarts in ...
Full should be only 4.5 quarts.

I am never a fan of coincidental failures so perhaps you are simply over full? How much did you put in to "top it off"?

Rich
 
Reply
Old Oct 5, 2008 | 08:06 AM
  #7  
craigfsl's Avatar
craigfsl
Thread Starter
|
2nd Gear
Joined: May 2008
Posts: 95
Likes: 0
not even quarter quart, i checked that when it came on thinking it had to be something dumb like that but it was 6am and really dark and hard to tell.

so according to what you have it could be 3/4 quarter over what it should be.

also when I was changing the susp. I did notice that the oil that drained from the old filter was all over the pass tire so that could trip the asc if that tire was constantly trying to spin.
 
Reply
Old Oct 5, 2008 | 11:49 AM
  #8  
craigfsl's Avatar
craigfsl
Thread Starter
|
2nd Gear
Joined: May 2008
Posts: 95
Likes: 0
checked oil its about 1/2 quart over. drove it today no lights what so ever so we shall see tomorrow
 
Reply
Old Oct 5, 2008 | 02:57 PM
  #9  
Rich.Wolfson's Avatar
Rich.Wolfson
6th Gear
iTrader: (1)
Joined: Dec 2002
Posts: 1,266
Likes: 3
From: Northern New Jersey
Originally Posted by craigfsl
checked oil its about 1/2 quart over. drove it today no lights what so ever so we shall see tomorrow
Sometimes it is simple. Good luck.

Rich
 
Reply
Old Oct 5, 2008 | 04:29 PM
  #10  
craigfsl's Avatar
craigfsl
Thread Starter
|
2nd Gear
Joined: May 2008
Posts: 95
Likes: 0
yeah i hope so.

I did notice the pass upper strut mount ins ripping so that will have to get changed.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
silence2-38554
R50/R53 :: Hatch Talk (2002-2006)
98
Sep 21, 2016 02:52 PM
sprp85
MINI Parts for Sale
4
Aug 22, 2015 06:16 AM
Mini Cooper r56 Pr
Drivetrain (Cooper S)
3
Aug 12, 2015 07:42 PM
truedrew
R60/R61 Stock Problems/Issues
4
Aug 10, 2015 10:39 AM
Lt. Dan
Drivetrain (Cooper S)
4
Aug 10, 2015 08:23 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 12:29 AM.