FS:: R56 part out!
#1
R56 part out! PERFORMANCE MODS! METH, INTAKE, WHEELS, EXHAUST!
Category: Drivetrain
Price: $3
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R56
Location (Region): Midwestern
Item Condition: Used
Unfortunately due to an accident....
1)R56 Floor Mats - $40 SOLD
2)R56 Cargo Lid/Shelf - $80
http://new.minimania.com/part/G2NMI7...Mini-Cooper--S
3)5MM Hub Centric Wheel Spacers - $20 SOLD
4)NM Engineering Intake N18 UPGRADE - $180
5)NM Engineering Intake with Pipe and JMTC Silicone for Turbo Upgrade - $350
6)DevilsOwn DVC-30 Meth Injection Kit - $300 SOLD
(Meth Pump, Meth Controller with boost line, add a circuit for switch, Check Valve, DO7 Nozzle)
*Need to extend harness or buy new harness and need to purchase 1/4” tubing, I had to cut harness and tubing upon removal*
http://www.alcohol-injection.com/en/...-stage-2a.html
7)R56 Black Headlight Rings - $65 SOLD
https://www.waymotorworks.com/black-...ght-trim-ring…
8)R56 Map Sensor - $10
http://www.eeuroparts.com/Parts/6589...or-0261230253/
9)DevilsOwn Meth Electric Solenoid - $40
http://www.alcohol-injection.com/en/...-solenoid.html
10)R56 MAF Sensor - $100
http://www.eeuroparts.com/Parts/3637...or-0280218205/
11)NM Engineering Boost Sensor Tap - $20 SOLD
http://www.nm-eng.com/nm498856-nm-en...ensor-tap.html
12)Team Dynamics Pro Race 1.2 Wheels 17x7 et45 4x100 with TPMS Sensors - $700 SOLD
http://www.outmotoring.com/mini-coop...-pro-race.html
13)My Custom CravenSpeed Intake Manifold Spacer - $250
(4 DevilsOwn DOT2 Nozzles with 4 way splitter for Direct Port Injection)
*Complicated install with the nozzles in place, Some modification required*
http://www.cravenspeed.com/the-koala...nifold-spacer/
14) iPod Media Cable w/ Lightning Adapter BMW 61122344300 -$50 SOLD
http://parts.seattlemini.com/p/Mini_...122344300.html
15) MINI OEM Catted Downpipe - To be determined, Email me
16) MINI Second Cat - To be determined, Email me
LOCATED ELK GROVE, CA
EMAIL ONLY
jtotah94@icloud.com
Last edited by johntotah94; 04-01-2016 at 11:55 AM.
#4
I was not able to remove it, would have took a ton of work to do in the back of a tow yard. And the turbo had a loose wastegate which needed to be repaired.
#7
Trending Topics
#10
Manifold setup was a tight squeeze. Theres a wiring harness below the intake manifold that has to be moved to fit the spacer because of the nozzles in the way.
Thread
Thread Starter
Forum
Replies
Last Post
NVmini
MINI Parts for Sale
5
02-29-2016 09:07 AM
Mini Mania
Vendor Announcements
0
02-16-2016 08:26 AM