R61 issues after replacing turbo
issues after replacing turbo
I recently replaced the turbo on my 2015 paceman s all4 with a Stigan 847-1550. Installation went well, and I closely followed the pre oiling procedure. Now, under light acceleration the turbo begins to build boost (I have a gauge to monitor) then the car goes from bogging down to surging 2-3 times before accelerating as normal. No codes, or strange noises, smells, etc.
Any ideas on what could cause this? Do I need a tune, catless downpipe, could it be a boost leak, etc?
2015 Paceman S All4 with gplus intercooler, k&N typhoon intake, and borla catback exhaust.
thanks
Any ideas on what could cause this? Do I need a tune, catless downpipe, could it be a boost leak, etc?
2015 Paceman S All4 with gplus intercooler, k&N typhoon intake, and borla catback exhaust.
thanks
Cheap Chinese turbo?
https://www.turbochargerpros.com/buynow/40-30091_SH
Bad wastegate actuator? Faulty diverter valve? Sounds like the control between off and on boost isn't quite happening correctly. Could be coincidence, or could be related to quality of the turbo parts.
https://www.turbochargerpros.com/buynow/40-30091_SH
Bad wastegate actuator? Faulty diverter valve? Sounds like the control between off and on boost isn't quite happening correctly. Could be coincidence, or could be related to quality of the turbo parts.
We have seen and heard of those other brands sticking on the wastegate at the pivot point. Bad machining. It will throw a code eventually under full pulls.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Great! Glad to help. Red one looks good. https://www.ecstuning.com/Search/Sit...h/11127646552/
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; Nov 28, 2023 at 11:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Drivetrain JMTC S42 Turbo Inferior Quality
gordopizza
Drivetrain (Cooper S)
17
Jan 28, 2022 08:16 PM
Drivetrain Low boost after 4k miles on 42mm turbo
Lyman
Drivetrain (Cooper S)
13
Oct 15, 2017 06:37 AM










