Hello, I’ve been directed here to the gurus of mini, I have an issue and I need help pinning it all down. I have a 2011 Mini Cooper countryman s all4 just rebuilt their motor. Had an issue with it wanting to start then die finally had multiple codes code come up. I could clear them and different ones would come back fixed the issue with a ground wire on the valve cover.

new issues

Alright new issue....

Codes I am getting
P16e7
P0324
P10ed
Po53a

Car was running fine then started all this.....


I drove the car out of the shop it was running for about 20 mins dueling quietly now I have no gas pedal can’t drive it but when it’s idle if it sounds alright aside from the noisy valvetrain. I checked the timing on everything and compression again and it is all spot on!

I am very very lost here because the only different I can find between now and before the rebuild is is running on all 4 cylinders..

please help thanks in advance!

 

Code p16e7 comes on immediately after clearing the codes as soon as the ignition is on its back instantly does anybody have a wiring diagram for this circuit?

 

Try this site: https://www.newtis.info/tisv2/a/en/r60-cooper-sav/

 

thank you!